EUVIMEDEUVIMED entdecken
Crossref

Strain rate–dependent tensile behavior of high-density polyethylene: Experimental characterization and finite element modeling

Vahit Keyfli, Zakir Taş, Mehmet Akif Dündar, Kazım Ercan, Osman Özenç

Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi · 16.06.2026 · 17

DOI: 10.28948/ngumuh.1909194 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, online erschienen am 16.06.2026. Verfasst von Vahit Keyfli und 4 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the tensile behavior of high-density polyethylene (HDPE) at different strain rates using experiments and finite element analysis. Uniaxial tensile tests were conducted at strain rates from 5 × 10-3 to 5 × 10-1 s-1, revealing clear rate sensitivity. The elastic modulus and true tensile yield stress increased with strain rate, while fracture strain decreased, indicating reduced ductility at higher rates. Finite element simulations in ABAQUS applied a linear Drucker–Prager model with a Von Mises yield surface combined with the Cowper–Symonds equation. The model captured the rate-dependent increase in yield stress and the overall post-yield response. However, strain hardening at higher strain rates was overestimated because the hardening curve was defined at the lowest strain rate and the modulus was assumed rate-independent. Overall, the framework provides an efficient approach for predicting the tensile response of HDPE, though incorporating rate-dependent hardening and viscoelasticity would improve post-yield predictions.

Zitieren

APA

Keyfli, V., Taş, Z., Dündar, M. A., Ercan, K., & Özenç, O. (2026). Strain rate–dependent tensile behavior of high-density polyethylene: Experimental characterization and finite element modeling. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 17. https://doi.org/10.28948/ngumuh.1909194

Vancouver

Keyfli V, Taş Z, Dündar MA, Ercan K, Özenç O. Strain rate–dependent tensile behavior of high-density polyethylene: Experimental characterization and finite element modeling. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi. 2026;17. doi:10.28948/ngumuh.1909194

BibTeX
@article{Keyfli2026,
  author = {Keyfli, Vahit and Taş, Zakir and Dündar, Mehmet Akif and Ercan, Kazım and Özenç, Osman},
  title = {Strain rate–dependent tensile behavior of high-density polyethylene: Experimental characterization and finite element modeling},
  journal = {Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi},
  year = {2026},
  volume = {17},
  doi = {10.28948/ngumuh.1909194}
}
Kostenlos starten →