ВИЗНАЧЕННЯ ЕЛЕКТРОМАГНІТНОГО НАВАНТАЖЕННЯ НА СЕРЕДОВИЩЕ МЕТОДАМИ МОДЕЛЮВАННЯ ПОШИРЕННЯ ЕЛЕКТРОМАГНІТНИХ ПОЛІВ
Системи управління, навігації та зв’язку. Збірник наукових праць · 27.02.2026 · 1 (83) · 148-152
DOI: 10.26906/sunz.2026.1.148 ↗Kurz gefasst
Fachartikel in der Zeitschrift Системи управління, навігації та зв’язку. Збірник наукових праць, online erschienen am 27.02.2026. Verfasst von Valentyn Glyva und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The possibilities of using modelling of the propagation of electromagnetic fields from heterogeneous sources to determine electromagnetic loads in areas within individual buildings and premises have been investigated. Such modelling is advisable when it is impossible to determine the electromagnetic environment by field measurements – at the stages of design and examination of objects, design of electrical and electronic equipment placement, etc. A prerequisite for correct modelling is the determination of mathematical functions that describe the propagation of electromagnetic fields of different frequencies and frequency ranges. Such functions must have assumptions and simplifications that ensure an acceptable calculation error and be convenient for creating application software. The initial data for modelling is obtained from the technical documentation of the equipment that generates electromagnetic fields and from the results of measurements of the parameters of fields of similar equipment in operation. If there are diagrams of the directivity of electromagnetic fields and the propagation of low-frequency fields, the value of the electric and magnetic components of the electromagnetic field or the energy flux density is calculated at each point with the required step. The sum of the ratios of the squares of the electric and magnetic field intensities to the squares of the corresponding maximum permissible values must exceed one. This complies with current health standards. The distances for which the calculation is performed are determined in each specific case and must cover the entire territory or area for which the desired indicators are determined.
Zitieren
APA
Glyva, V., Patereha, Y., & Shabatura, T. (2026). ВИЗНАЧЕННЯ ЕЛЕКТРОМАГНІТНОГО НАВАНТАЖЕННЯ НА СЕРЕДОВИЩЕ МЕТОДАМИ МОДЕЛЮВАННЯ ПОШИРЕННЯ ЕЛЕКТРОМАГНІТНИХ ПОЛІВ. Системи управління, навігації та зв’язку. Збірник наукових праць, 1(83), 148-152. https://doi.org/10.26906/sunz.2026.1.148
Vancouver
Glyva V, Patereha Y, Shabatura T. ВИЗНАЧЕННЯ ЕЛЕКТРОМАГНІТНОГО НАВАНТАЖЕННЯ НА СЕРЕДОВИЩЕ МЕТОДАМИ МОДЕЛЮВАННЯ ПОШИРЕННЯ ЕЛЕКТРОМАГНІТНИХ ПОЛІВ. Системи управління, навігації та зв’язку. Збірник наукових праць. 2026;1(83):148-152. doi:10.26906/sunz.2026.1.148
BibTeX
@article{Glyva2026,
author = {Glyva, Valentyn and Patereha, Yurii and Shabatura, Taras},
title = {ВИЗНАЧЕННЯ ЕЛЕКТРОМАГНІТНОГО НАВАНТАЖЕННЯ НА СЕРЕДОВИЩЕ МЕТОДАМИ МОДЕЛЮВАННЯ ПОШИРЕННЯ ЕЛЕКТРОМАГНІТНИХ ПОЛІВ},
journal = {Системи управління, навігації та зв’язку. Збірник наукових праць},
year = {2026},
volume = {1},
number = {83},
pages = {148--152},
doi = {10.26906/sunz.2026.1.148}
}
EUVIMED