Fe2+ and Zn2+ Single and Competitive Biosorption from Binary Metal Solution Using Phosphoric Acid-Activated Cashew Nutshell to Minimize Ecotoxicity
Applied Environmental Biotechnology · 12.11.2026 · 11 (1) · 22
DOI: 10.26789/aeb.2026.01.003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Environmental Biotechnology, online erschienen am 12.11.2026. Verfasst von Yusufu Luka und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Metal contamination in water bodies is usually present as multiple metals rather than a single metal, and the excess of zinc (Zn) and iron (Fe) in particular affects human health and industrial equipment performance. In order to solve the challenges with metallic oxide adsorbents for removing these metals from water, this study sought to utilize cashew nutshell activated carbon (CNS-AC), activated using phosphoric acid (H3PO4), for their individual and simultaneous/competitive sorption. Two cases involving a bimetallic solution of initial concentration () between 5 and 200 mg/L and the one dosed with 4–40 g/L of CNS-AC adsorbent were analyzed at Zn:Fe ratios of 1:1.3, 1.7:1, and 1:2.6. The variations were tested against the removal efficiency (RE) and adsorption capacities () of Zn, Fe, or Zn-Fe mono- or competitive sorption, as H3PO4 activation promotes higher pore development and surface area. Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and atomic absorption spectrophotometry were conducted pre- and/or post-sorption by CNS-AC to determine the functional groups, morphology, and ion concentrations. Findings show that a 603.36 cm−1 peak implied an adsorbent-metal interaction by FTIR and a smooth texture microstructure by SEM. For all ratios, the lower the , the higher the RE for single and co-sorption, and the lower the for mono-sorption of ions. On the other hand, the optimal dose of 40 g/L corresponds to a maximum RE of approximately 28.97% across all Zn-Fe ratios for individual and multiple ion removal. Considering the doses, the 1.7:1 ratio is the most effective in terms of RE and , while 1:1.3 ratio effectively removes Zn+Fe under changing . The findings generally depict a moderate adsorption process with room for further improvement. Because the presence of Zn and Fe in water is generally suitable for drinking, industrial use, and equipment safety, it must be < 1 and < 0.05 mg/L, respectively. Compared to hydrochloric and nitric acids, H3PO4 is less corrosive and environmentally safer, as it produces fewer toxic fumes.
Zitieren
APA
Luka, Y., Abubakar, A. M., Waziri, A. Y., & Lauwalu, A. G. (2026). Fe2+ and Zn2+ Single and Competitive Biosorption from Binary Metal Solution Using Phosphoric Acid-Activated Cashew Nutshell to Minimize Ecotoxicity. Applied Environmental Biotechnology, 11(1), 22. https://doi.org/10.26789/aeb.2026.01.003
Vancouver
Luka Y, Abubakar AM, Waziri AY, Lauwalu AG. Fe2+ and Zn2+ Single and Competitive Biosorption from Binary Metal Solution Using Phosphoric Acid-Activated Cashew Nutshell to Minimize Ecotoxicity. Applied Environmental Biotechnology. 2026;11(1):22. doi:10.26789/aeb.2026.01.003
BibTeX
@article{Luka2026,
author = {Luka, Yusufu and Abubakar, Abdulhalim Musa and Waziri, Abubakar Yusuf and Lauwalu, Aminu Girei},
title = {Fe2+ and Zn2+ Single and Competitive Biosorption from Binary Metal Solution Using Phosphoric Acid-Activated Cashew Nutshell to Minimize Ecotoxicity},
journal = {Applied Environmental Biotechnology},
year = {2026},
volume = {11},
number = {1},
pages = {22},
doi = {10.26789/aeb.2026.01.003}
}
EUVIMED