Investigation of Structural, Morphological, Optical, and Electro-optical Properties of PZT Thin Films Deposited by Custom-Made RF Magnetron Sputter
Physics and Astronomy Reports · 12.05.2026 · 4 (1) · 74-82
DOI: 10.26650/par.2026.00003 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics and Astronomy Reports, online erschienen am 12.05.2026. Verfasst von Ahmet Ünverdi und 7 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben.
Abstract (Originalsprache)
This study investigates the structural, morphological, optical, and electro-optical characteristics of Pb(Zr0.52Ti0.48)O3 (PZT) thin films deposited on fluorine-doped tin oxide (SnO2:F, FTO) substrates using a custom-made radio frequency (RF) magnetron sputtering system. The films were grown at a substrate temperature of 300 oC and subsequently annealed at 650 oC for 1 hour in a muffle furnace in an air ambient to promote crystallization and phase formation. XRD analysis confirms the formation of polycrystalline perovskite PZT with a preferred (110) orientation, average lattice constant of 4.09 Å, and average crystallite size of 37.06 nm. SEM analysis reveals a homogeneous granular surface morphology with grain sizes ranging from 95 to 105 nm, while EDS analysis verifies a Zr/Ti atomic ratio of 51.9/48.1, closely matching the morphotropic phase boundary (MPB) composition of the PZT in the target. Optical transmittance measurements show approximately 80% transmittance in the visible region, and Tauc’s plot analysis yields a direct bandgap of 3.35 eV for the annealed film, representing a significant blue shift compared to the 2.66 eV bandgap of the as-deposited film. The transient photocurrent measurements carried out under the Hg-Xe light excitation reveal an increase from picoampere level (dark) to 17 nA (illuminated), with rise and fall times of ∼ 130 ms. The results demonstrate that RF magnetron sputtering combined with appropriate thermal treatment produces high-quality PZT thin films, which can be suitable for ultraviolet (UV) optoelectronic applications.
Zitieren
APA
Ünverdi, A., Doğan, Ü., Büyükharman, M., Aydın, M., Özdilek, Ş., Ökçün, A., Sarcan, F., & Erol, A. (2026). Investigation of Structural, Morphological, Optical, and Electro-optical Properties of PZT Thin Films Deposited by Custom-Made RF Magnetron Sputter. Physics and Astronomy Reports, 4(1), 74-82. https://doi.org/10.26650/par.2026.00003
Vancouver
Ünverdi A, Doğan Ü, Büyükharman M, Aydın M, Özdilek Ş, Ökçün A, et al. Investigation of Structural, Morphological, Optical, and Electro-optical Properties of PZT Thin Films Deposited by Custom-Made RF Magnetron Sputter. Physics and Astronomy Reports. 2026;4(1):74-82. doi:10.26650/par.2026.00003
BibTeX
@article{nverdi2026,
author = {Ünverdi, Ahmet and Doğan, Ümit and Büyükharman, Mustafa and Aydın, Mustafa and Özdilek, Şule and Ökçün, Alican and Sarcan, Fahrettin and Erol, Ayşe},
title = {Investigation of Structural, Morphological, Optical, and Electro-optical Properties of PZT Thin Films Deposited by Custom-Made RF Magnetron Sputter},
journal = {Physics and Astronomy Reports},
year = {2026},
volume = {4},
number = {1},
pages = {74--82},
doi = {10.26650/par.2026.00003}
}
EUVIMED