EUVIMEDEUVIMED entdecken
Crossref

Bearing Capacity Improvement In Soils Using Waste Tire Rubber Fibers

Sanjeev Naval

i-manager's Journal on Structural Engineering · 2013

DOI: 10.26634/jste.1.4.2135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift i-manager's Journal on Structural Engineering, 2013. Verfasst von Sanjeev Naval. Die Arbeit nennt 12 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Disposal of waste tires has become a challenging task across the globe. In India nearly 100 million tons of scrap tires are discarded every year, Korea generates nearly 20 million tons, in U.S. an estimate touches 250 million tones & Canada generates nearly 28 million tons of waste tires every year (Yoon et al. 2006) . The uncontrolled tire dumps, stockpiles throughout the countries, is a threat to environment and public health. Several beneficial uses of tire waste have been proposed in the last decade. This includes: using tire chips for lightweight fill (Humphery and Manion (1992), Foose et al.(1996). Ahmed (1993) conducted triaxial tests on mixtures tire chips with Ottawa sand. He found that apparent cohesion increases and friction angle decreases as chip content is increased in the mix. Edil and Bosscher (1994) revealed that addition of 25% chips (size 20 to 80mm) to sand results in greater shear strength at low normal stresses. Lee et.al (1999) determined the stress strain relationship of mixture of sand and tire chips and observed that dilatancy behavior of rubber sand is in between pure sand and pure chips. Dutta and Rao (2006) assessed the stress strain volume change response in a triaxial compression tests on sand tire chip mixture. The tire chips had size of 10mmx10mm, 20mmx20mm and 10mmx20mm.The study indicated that addition of tire By chips in sand causes marginal increase of 20 in all the sizes. Yoon et.al. (2008) performed plate load tests on tire cell reinforced sand. The sand samples with different relative densities of 40%, 50% and 70% were prepared, it was concluded that BCR in loose sand with tire cell showed improvement in BCR as 2.5 at a depth of 0.2 times the plate width and BCR decreased as density increased. The direct shear tests performed by Attom (2006) on rubber shred mixed sand shows shear strength improvement from 2 2 0.47kg/cm at 0% to 0.95kg/cm at 40% tire shred content. Triaxial testing by Dutta and Rao (2009) on tire shred mixed soil showed increase in energy absorption capacity, deviator stress with the increase in aspect ratio, chip content and confining pressure. The direct shear tests on rubber sand mixes at low temperatures by Christ and Park (2010) at different rubber contents of 0%, 10%, 15%, 20% and 30% indicated improvement in the compressive, tensile and shear strength of rubber mixed soil. Unconfined compression testing by Roustaei and Ghazavi (2011) on waste tire mixed clay soil shows improvement in reduction of strength in freeze and thaw cycles thus pointing towards the application of waste tire scrap in cold regions. 1.

Zitieren

APA

Naval, S. (2013). Bearing Capacity Improvement In Soils Using Waste Tire Rubber Fibers. i-manager's Journal on Structural Engineering. https://doi.org/10.26634/jste.1.4.2135

Vancouver

Naval S. Bearing Capacity Improvement In Soils Using Waste Tire Rubber Fibers. i-manager's Journal on Structural Engineering. 2013. doi:10.26634/jste.1.4.2135

BibTeX
@article{Naval2013,
  author = {Naval, Sanjeev},
  title = {Bearing Capacity Improvement In Soils Using Waste Tire Rubber Fibers},
  journal = {i-manager's Journal on Structural Engineering},
  year = {2013},
  doi = {10.26634/jste.1.4.2135}
}
Kostenlos starten →