Three-Phase Non Isolated Interleaved Boost Converter
i-manager's Journal on Power Systems Engineering · 2013
DOI: 10.26634/jps.1.3.2464 ↗Kurz gefasst
Fachartikel in der Zeitschrift i-manager's Journal on Power Systems Engineering, 2013. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben.
Abstract (Originalsprache)
Renewable energy sources, such as photovoltic cell and fuel cells, have quite low voltage output and require series connection or a voltage booster to provide enough output voltage. High step up gain, high efficiency and non -isolation are the main characteristics for these applications[13]-[17]. Large input current and highoutput voltage are the two major concerns for high step up converters. The high-step-up DC-DC converters can be Non isolated but they should operate at high efficiency while taking high currents from low voltage DC sources at their inputs. In conventional boost converter, the duty ratio increases as the output to input voltage ratio increases. Therefore, the conventional boost converters will require extreme duty ratios to meet the high voltage step-up requirements[18]-[22]. In three-phase IBC the duty ratio selection is based on the number of phases, the ripple is minimum at a certain duty ratio. In conventional boost converter the extreme duty-cycle operation drives short-pulsed currents with high amplitude to flow through the output diodes and the capacitors, which cause severe diode reverse recovery problem and increases in the conduction losses[23]-[27]. The reverse recovery problem will degrade the efficiency and limit the power level of conventional boost converter. To
Zitieren
APA
(2013). Three-Phase Non Isolated Interleaved Boost Converter. i-manager's Journal on Power Systems Engineering. https://doi.org/10.26634/jps.1.3.2464
Vancouver
Three-Phase Non Isolated Interleaved Boost Converter. i-manager's Journal on Power Systems Engineering. 2013. doi:10.26634/jps.1.3.2464
BibTeX
@article{euvimed2013,
title = {Three-Phase Non Isolated Interleaved Boost Converter},
journal = {i-manager's Journal on Power Systems Engineering},
year = {2013},
doi = {10.26634/jps.1.3.2464}
}
EUVIMED