EUVIMEDEUVIMED entdecken
Crossref

Formability Characteristics Of Different Sheet Metals By Erichsen Cupping Testing With Ndt Methods

Animesh Talapatra

i-manager's Journal on Material Science · 2013

DOI: 10.26634/jms.1.1.2280 ↗

Kurz gefasst

Fachartikel in der Zeitschrift i-manager's Journal on Material Science, 2013. Verfasst von Animesh Talapatra. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 8 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this experiment is to find out the cupping index of different sheet metals in different thickness using ERICHSEN cupping testing machine (Model ET-20, least count of 0.01 mm) in metal forming operations (stretching). In the ERICHSEN cupping test, the sheet metal test piece is clamped under a pressure of 1000 ± 100 kgf between a blank holder and a die. This test is a type of stamping test, which uses a polished steel ball or a spherical punch of a standard size mounted on a plunger to penetrate into the specimen with a constant force until the specimen produces first crack. The machine is to be operated at 4.8 r.p.m. by handwheeel. Under the action of the force, the specimen sheet forms a cup-like structure, hence known as the 'ERICHSEN cupping testing. The production of the first crack may either be detected by Non-Destructive Testing (NDT) like Visual Test (VT) or Liquid Penetration Test (LPT). A total force of around 10 KN was applied on the sample sheet metals until the specimen finally cracked. Then the work piece is pressed into the die by a ball shaped indenter (20mm diameter) until the cracks begin to occur in the specimen. The measure of the length of penetration in mm, indicates the ERICHSEN Number which gives a measure of the ductility of the sheet in the plane of drawing under biaxial stress conditions. The ERICHSEN no is the penetration of the die given in millimeters to the nearest decimal point, upto the point at which cracks occur (end point).Finally NDT method was used to find out formability Characteristics of different sheet metals.

Zitieren

APA

Talapatra, A. (2013). Formability Characteristics Of Different Sheet Metals By Erichsen Cupping Testing With Ndt Methods. i-manager's Journal on Material Science. https://doi.org/10.26634/jms.1.1.2280

Vancouver

Talapatra A. Formability Characteristics Of Different Sheet Metals By Erichsen Cupping Testing With Ndt Methods. i-manager's Journal on Material Science. 2013. doi:10.26634/jms.1.1.2280

BibTeX
@article{Talapatra2013,
  author = {Talapatra, Animesh},
  title = {Formability Characteristics Of Different Sheet Metals By Erichsen Cupping Testing With Ndt Methods},
  journal = {i-manager's Journal on Material Science},
  year = {2013},
  doi = {10.26634/jms.1.1.2280}
}
Kostenlos starten →