Ga Based Pid Control Of Magnetic Levitation System
i-manager's Journal on Instrumentation and Control Engineering · 2013
DOI: 10.26634/jic.1.4.2603 ↗Kurz gefasst
Fachartikel in der Zeitschrift i-manager's Journal on Instrumentation and Control Engineering, 2013. Verfasst von S. Kishore. Die Arbeit nennt 10 Literaturangaben.
Abstract (Originalsprache)
Magnetic levitation systems have acquired a great attention due to their practical importance. Maglev is a system of transportation that suspends guides and propels vehicles, dominantly trains. Maintenance problem caused by friction is completely eliminated, since it does not use long reaching and joining parts. Various other problems such as abrasion, lubrication, long endurance, controllable support force, adjustable stiffness, etc. can also be taken into account. Magnetic levitation systems are electromagnet devices that suspend ferromagnetic material using electromagnetism [2]. The controller is the heart of the magnetic levitation system, as it regulates the position of the steel ball at a desired height in an environment. It determines the carrying, stiffness and damping characteristics of the maglev support, and impacts the dynamic performance of the system [7]. Overshoot and settling time are the key factors which are to be considered while considering the maglev system. In this paper, we provide a real time PID controller and GA based PID controller implementation. In GA based PID control scheme, the optimal PID parameters are properly optimized using Genetic algorithm. Finally the performance criteria are analyzed for both the controllers. 1. Magnetic Levitation System Magnetic levitation system is ball suspension system which By is used to levitate the 21 gram steel ball in air using electromagnetic force against the gravitational pull [9].The magnetic levitation system shown in Figure 1 consists of an electromagnet, a steel ball, a position sensor, a data acquisition AD/DA board, a control computer and a drive circuit. The steel ball gets suspended in the desired position using electromagnetic force [6], which is generated by applying the current through the coil. The displacement of ball from the balance point is measured using the position sensor which is placed on either side of the casing. The sensor system gives the positions of the levitation object. The displacement signal [1] is then transmitted to the microprocessor, which works as the controller. The controller
Zitieren
APA
Kishore, S. (2013). Ga Based Pid Control Of Magnetic Levitation System. i-manager's Journal on Instrumentation and Control Engineering. https://doi.org/10.26634/jic.1.4.2603
Vancouver
Kishore S. Ga Based Pid Control Of Magnetic Levitation System. i-manager's Journal on Instrumentation and Control Engineering. 2013. doi:10.26634/jic.1.4.2603
BibTeX
@article{Kishore2013,
author = {Kishore, S.},
title = {Ga Based Pid Control Of Magnetic Levitation System},
journal = {i-manager's Journal on Instrumentation and Control Engineering},
year = {2013},
doi = {10.26634/jic.1.4.2603}
}
EUVIMED