EUVIMEDEUVIMED entdecken
Crossref

Biodiesel Synthesis and Fuel Property Analysis of Produced Biodiesel

Surya BS, Dr Manjunatha Swamy K M, C V Sudhanva Rao, Dheeraj Varma Muppala, Vineeth Vr

i-manager's Journal on Chemical Sciences · 20.04.2026 · 6 (1) · 1

DOI: 10.26634/jchem.6.1.11151 ↗

Kurz gefasst

Fachartikel in der Zeitschrift i-manager's Journal on Chemical Sciences, online erschienen am 15.04.2026. Verfasst von Surya BS und 4 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing demand for energy and the rapid depletion of fossil fuel reserves have intensified the search for renewable and sustainable alternative fuels. Biodiesel has emerged as a promising substitute for conventional diesel due to its biodegradability, non-toxicity, and lower exhaust emissions. In the present work, biodiesel was produced from non-edible oil extracted from Thevetia peruviana (yellow oleander) seeds, which are abundantly available in tropical and subtropical India and do not compete with food resources. Oil extraction was carried out using the solvent extraction method with hexane (AR Grade), yielding an average oil extraction of approximately 38% from multiple experimental runs. The extracted oil exhibited a free fatty acid (FFA) value of 11.7 mgKOH/g and a moisture content below 0.5%. Biodiesel production followed a two-step process: acid esterification (Step 1) using methanol and sulphuric acid (99% pure) as acid catalyst to reduce FFA to 0.36 mgKOH/g, followed by alkaline transesterification (Step 2) using sodium methoxide (99% pure) as catalyst. The main advantage of sodium methoxide over sodium hydroxide or potassium hydroxide is its virtually water-free character, which avoids saponification side reactions. An overall biodiesel yield of 93% was achieved after systematic optimization of molar ratio, catalyst concentration, reaction temperature, and reaction time. The process was repeated three times to confirm repeatability. Key fuel properties evaluated include density, kinematic viscosity, flash point, cloud point, pour point, carbon residue, copper strip corrosion, acid value, free glycerin, total glycerin, and calorific value. The ester yield was calculated by dividing the ester mass by the mass of pretreated oil. All measured properties were found to be within the limits of ASTM D6751 and IS 15607:2005 specifications, demonstrating the viability of Thevetia peruviana biodiesel as an alternative fuel for compression ignition engines.

Zitieren

APA

BS, S., M, D. M. S. K., Rao, C. V. S., Muppala, D. V., & Vr, V. (2026). Biodiesel Synthesis and Fuel Property Analysis of Produced Biodiesel. i-manager's Journal on Chemical Sciences, 6(1), 1. https://doi.org/10.26634/jchem.6.1.11151

Vancouver

BS S, M DMSK, Rao CVS, Muppala DV, Vr V. Biodiesel Synthesis and Fuel Property Analysis of Produced Biodiesel. i-manager's Journal on Chemical Sciences. 2026;6(1):1. doi:10.26634/jchem.6.1.11151

BibTeX
@article{BS2026,
  author = {BS, Surya and M, Dr Manjunatha Swamy K and Rao, C V Sudhanva and Muppala, Dheeraj Varma and Vr, Vineeth},
  title = {Biodiesel Synthesis and Fuel Property Analysis of Produced Biodiesel},
  journal = {i-manager's Journal on Chemical Sciences},
  year = {2026},
  volume = {6},
  number = {1},
  pages = {1},
  doi = {10.26634/jchem.6.1.11151}
}
Kostenlos starten →