Improving Rebar Production Processes Through Six Sigma Methodology
Journal of Technology Research · 13.03.2026 · 4 (1) · 63-72
DOI: 10.26629/jtr.2026.07 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Technology Research, online erschienen am 13.03.2026. Verfasst von Mahmud M. Abushalla und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Improving productivity and reducing waste in manufacturing processes is a primary objective for all industrial organizations. Theoretical Six Sigma calculations were applied to actual data collected from the heat-treated and mechanically treated (TMT) steel bar plant of the Libyan Iron and Steel Company (LISCO). This was achieved by applying the Six Sigma (Definition, Measurement, Analysis, Improvement, and Control) methodology and using tools such as control charts, Pareto analysis, cause and-effect diagrams, and SPSS software, with the aim of optimizing the manufacturing process of heat treated and mechanically treated steel bars. The results obtained from the applied calculations showed a promising level of improvement, with the production waste rate decreasing to approximately 1.7%. The process parameters affecting the mechanical properties of heat-treated and mechanically treated steel bars were also identified. Therefore, it can be concluded that the study has yielded valuable and encouraging results.
Zitieren
APA
Abushalla, M. M., Aswihli, H. A., Sasi, J. M. B., Eldabee, F. F., & Alhadar, F. (2026). Improving Rebar Production Processes Through Six Sigma Methodology. Journal of Technology Research, 4(1), 63-72. https://doi.org/10.26629/jtr.2026.07
Vancouver
Abushalla MM, Aswihli HA, Sasi JMB, Eldabee FF, Alhadar F. Improving Rebar Production Processes Through Six Sigma Methodology. Journal of Technology Research. 2026;4(1):63-72. doi:10.26629/jtr.2026.07
BibTeX
@article{Abushalla2026,
author = {Abushalla, Mahmud M. and Aswihli, Hitem A. and Sasi, Jamal M. Ben and Eldabee, Faraj F. and Alhadar, Fouzi},
title = {Improving Rebar Production Processes Through Six Sigma Methodology},
journal = {Journal of Technology Research},
year = {2026},
volume = {4},
number = {1},
pages = {63--72},
doi = {10.26629/jtr.2026.07}
}
EUVIMED