Inspection the Fuel Spray Pattern of The Injector Nozzle in Turboprop Engine by Using Fuel Testing Device
Journal of Technology Research · 15.12.2023 · 1 (2) · 102-113
DOI: 10.26629/jtr.2023.09 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Technology Research, online erschienen am 15.12.2023. Verfasst von Abdallah Abuzrida und 2 weiteren Autor:innen.
Abstract (Originalsprache)
This study deals experimental study to inspect the fuel spray pattern in fuel injector nozzle in turboprop engine type PT6A-60 SERIES produced by Pratt & Whitney Canada by using fuel testing device. due to incomplete combustion which is mainly occurred due to incorrect shape of fuel spray, it results in carbon formation inside the combustion chamber, which negatively effects on the fuel injector and compressor turbine (CT) vane. The cleaning procedure to fuel injector is done by two methods which are handling clean and ultrasonic clean device. The testing is done by using fuel injector testing machine which is use fuel to check spray pattern. This machine was made due to the need for it by the maintenance team, and the actual machine used by the manufacturer was not available. This test was carried out at different conditions which is the first at the start of operation at 20 psi, the second at low speed, 30 psi pressure, and the third at maximum speed at high pressure 60 psi. The case 01 and 02 have been taken at the time of maintenance check of the fuel injector in 15/12/2022, while the case 03 and 04 were taken also randomly from the same engine but in different time at 09/03/2023. From obtained results, most of the cases were acceptable and does not need to re-cleaning after testing, except case 04 was not acceptable and need to clean by ultrasonic device.
Zitieren
APA
Abuzrida, A., Hamed, A., & Alfaqiyah, Y. (2023). Inspection the Fuel Spray Pattern of The Injector Nozzle in Turboprop Engine by Using Fuel Testing Device. Journal of Technology Research, 1(2), 102-113. https://doi.org/10.26629/jtr.2023.09
Vancouver
Abuzrida A, Hamed A, Alfaqiyah Y. Inspection the Fuel Spray Pattern of The Injector Nozzle in Turboprop Engine by Using Fuel Testing Device. Journal of Technology Research. 2023;1(2):102-113. doi:10.26629/jtr.2023.09
BibTeX
@article{Abuzrida2023,
author = {Abuzrida, Abdallah and Hamed, Ahmed and Alfaqiyah, Yousuf},
title = {Inspection the Fuel Spray Pattern of The Injector Nozzle in Turboprop Engine by Using Fuel Testing Device},
journal = {Journal of Technology Research},
year = {2023},
volume = {1},
number = {2},
pages = {102--113},
doi = {10.26629/jtr.2023.09}
}
EUVIMED