EUVIMEDEUVIMED entdecken
Crossref

Laboratory Study on the Effect of CNC Plasma Cutting Process Parameters on Product Quality

Abdaladim S. Bala

Journal of Technology Research · 15.06.2023 · 1 (1) · 24-40

DOI: 10.26629/jtr.2023.03 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Technology Research, online erschienen am 15.06.2023. Verfasst von Abdaladim S. Bala.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CNC Plasma Cutting Technology is one of the most important cutting techniques that are widely used in the metal industries, due to its high ability to cut complex designs with great accuracy and low production cost. The quality of the products of this technology mainly depends on the rational control of the process parameters. In this study the effect of process parameters such as cutting speed, cutting current, and standoff distance on Kerf width and dross formation rate has been investigated using Taguchi method. The obtained results indicate that the cutting speed dominates both quality criteria with an impact rate of more than 57%, followed by cutting current which was around 12%, while the nozzle height showed very low impact on the quality criteria. Furthermore, the results of the conformation experiment indicate a high convergence between model and practical results in case of crack width and a lower level of congruence in case of the slag rate formation model due to narrow of testing levels.

Zitieren

APA

Bala, A. S. (2023). Laboratory Study on the Effect of CNC Plasma Cutting Process Parameters on Product Quality. Journal of Technology Research, 1(1), 24-40. https://doi.org/10.26629/jtr.2023.03

Vancouver

Bala AS. Laboratory Study on the Effect of CNC Plasma Cutting Process Parameters on Product Quality. Journal of Technology Research. 2023;1(1):24-40. doi:10.26629/jtr.2023.03

BibTeX
@article{Bala2023,
  author = {Bala, Abdaladim S.},
  title = {Laboratory Study on the Effect of CNC Plasma Cutting Process Parameters on Product Quality},
  journal = {Journal of Technology Research},
  year = {2023},
  volume = {1},
  number = {1},
  pages = {24--40},
  doi = {10.26629/jtr.2023.03}
}
Kostenlos starten →