Upcycling Recycled High-Density Polyethylene (HDPE) as Sustainable Aggregate in Concrete Paving Blocks: Experimental Performance and Predictive Modeling
Journal of Multidisciplinary Engineering · 15.03.2026 · 1 (1) · 59-67
DOI: 10.26629/jme.2026.08 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Multidisciplinary Engineering, online erschienen am 15.03.2026. Verfasst von Salhin Alaud und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Purpose
This study evaluates the feasibility of using recycled high-density polyethylene (HDPE) waste as a partial volumetric replacement for natural aggregate in concrete paving blocks and assesses its effects on mechanical performance, density, and water absorption. Materials and Methods: Concrete paving blocks were produced using crushed recycled HDPE granules as volumetric aggregate replacements at 10%, 20%, and 30% (CP10, CP20, and CP30, respectively), with a control mixture (R0). Fresh concrete workability was maintained at an 80 mm slump to isolate the effect of HDPE content on hardened-state properties. Compressive strength, flexural strength, bulk density, and water absorption were evaluated, and linear regression models were developed to examine relationships between HDPE content, density, and mechanical performance.
Results
Increasing HDPE content progressively reduced compressive strength from 65.66 MPa for R0 to 48.67–39.36 MPa for the HDPE mixtures, corresponding to reductions of 26–40%. Flexural strength decreased from 7.94 MPa to 6.91–4.49 MPa, representing reductions of 13–44%. In contrast, bulk density decreased from 2206.6 to 1926.7 kg/m³, corresponding to a maximum reduction of 12.7%. Water absorption also decreased, with all mixtures remaining below the 6.5% limit specified by LNCSM-7:2025. The regression models showed strong predictive relationships, with R² values up to 0.98 and a density–strength correlation of R² = 0.97.
Conclusions
Recycled HDPE can effectively produce lighter paving units while maintaining compliance with the specified water-absorption requirement. Although increasing HDPE content reduces mechanical strength, the 10% replacement level provides the most favorable balance between weight reduction and mechanical performance. This approach offers a practical route for valorizing urban HDPE waste in non-structural pedestrian paving applications. (J Multidiscip Eng 2026;1:59-67)
Zitieren
APA
Alaud, S., & Hussein, A. A. (2026). Upcycling Recycled High-Density Polyethylene (HDPE) as Sustainable Aggregate in Concrete Paving Blocks: Experimental Performance and Predictive Modeling. Journal of Multidisciplinary Engineering, 1(1), 59-67. https://doi.org/10.26629/jme.2026.08
Vancouver
Alaud S, Hussein AA. Upcycling Recycled High-Density Polyethylene (HDPE) as Sustainable Aggregate in Concrete Paving Blocks: Experimental Performance and Predictive Modeling. Journal of Multidisciplinary Engineering. 2026;1(1):59-67. doi:10.26629/jme.2026.08
BibTeX
@article{Alaud2026,
author = {Alaud, Salhin and Hussein, Abdulrahman A.},
title = {Upcycling Recycled High-Density Polyethylene (HDPE) as Sustainable Aggregate in Concrete Paving Blocks: Experimental Performance and Predictive Modeling},
journal = {Journal of Multidisciplinary Engineering},
year = {2026},
volume = {1},
number = {1},
pages = {59--67},
doi = {10.26629/jme.2026.08}
}
EUVIMED