EUVIMEDEUVIMED entdecken
Crossref

Strong-bond networks and basal-cleavage resistance govern strength–toughness balance and elevated-temperature retention in Ta-based medium-entropy 211 MAX ceramics

Lu Liu, Qifeng Zhuang, Xiyu Xiao, Wei Ding, Haoran Zhou, Xuefang Yin, Kaicheng Zhang, Baoze Zhao, Shun Dong, Guobing Ying

Journal of Advanced Ceramics · 2026-10 · 15 (10) · 9221368

DOI: 10.26599/jac.2026.9221368 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Ceramics, online erschienen am 29.10.2026. Verfasst von Lu Liu und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 76 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ta-containing Mn+1AXn (MAX) phases are promising high-temperature structural ceramics, but high density and concurrent optimization of strength, fracture toughness, and elevated-temperature property retention remain challenging. Entropy engineering can tailor M-site chemistry; however, it remains unclear how M-site combinations control the strength–toughness balance and elevated-temperature retention. Here, (TaNbV)2AlC, (TaTiNb)2AlC, (TaTiV)2AlC, and (TaTiNbV)2AlC were synthesized by vacuum hot pressing (HP) and investigated through phase and microstructural characterization, density functional theory (DFT)-based crystal orbital Hamilton population (COHP) analysis, deep potential molecular dynamics (DP-MD), and mechanics-based bridging models. Characterization confirmed a layered M2AlC-type framework and showed no obvious M-site elemental segregation within the examined regions. Compared with Ta2AlC, all medium-entropy ceramics showed reduced density and improved room-temperature flexural strength and fracture toughness, with (TaNbV)2AlC achieving 578 MPa and 8.5 MPa·m1/2. COHP revealed stronger M–C and M–Al bonding in Ta/Nb-centered environments than in Ti- and V-centered environments, explaining the flexural-strength grouping. However, fracture toughness required path-dependent basal-cleavage descriptors beyond the average bond strength. A validated DP-MD model demonstrated structural retention up to 1500 K under inert (oxygen-free) conditions and within the simulation time scale, intrinsic tensile softening, and composition-dependent cleavage-work retention. Qualitative-to-semiquantitative bridging projections indicate that (TaNbV)2AlC provides the highest absolute strength and toughness, whereas (TaTiNbV)2AlC has the best elevated-temperature retention. These results reveal that Ta/Nb-rich bonding and basal-cleavage resistance act as complementary, composition-dependent mechanisms governing the strength–toughness balance and its elevated-temperature retention in this Ta-based 211 MAX series, providing a mechanistic basis for designing entropy-engineered MAX ceramics with room-temperature performance and elevated-temperature property retention as distinct targets.

Zitieren

APA

Liu, L., Zhuang, Q., Xiao, X., Ding, W., Zhou, H., Yin, X., Zhang, K., Zhao, B., Dong, S., & Ying, G. (2026). Strong-bond networks and basal-cleavage resistance govern strength–toughness balance and elevated-temperature retention in Ta-based medium-entropy 211 MAX ceramics. Journal of Advanced Ceramics, 15(10), 9221368. https://doi.org/10.26599/jac.2026.9221368

Vancouver

Liu L, Zhuang Q, Xiao X, Ding W, Zhou H, Yin X, et al. Strong-bond networks and basal-cleavage resistance govern strength–toughness balance and elevated-temperature retention in Ta-based medium-entropy 211 MAX ceramics. Journal of Advanced Ceramics. 2026;15(10):9221368. doi:10.26599/jac.2026.9221368

BibTeX
@article{Liu2026,
  author = {Liu, Lu and Zhuang, Qifeng and Xiao, Xiyu and Ding, Wei and Zhou, Haoran and Yin, Xuefang and Zhang, Kaicheng and Zhao, Baoze and Dong, Shun and Ying, Guobing},
  title = {Strong-bond networks and basal-cleavage resistance govern strength–toughness balance and elevated-temperature retention in Ta-based medium-entropy 211 MAX ceramics},
  journal = {Journal of Advanced Ceramics},
  year = {2026},
  volume = {15},
  number = {10},
  pages = {9221368},
  doi = {10.26599/jac.2026.9221368}
}
Kostenlos starten →