EUVIMEDEUVIMED entdecken
Crossref

Ultrafast low-temperature fabrication of strong and tough high-entropy boride-based ceramics via reactive ZrSi 2 -assisted heavy direct current sintering

Lehao Liu, Yingjun Liu, Yuhan Yao, Yufei Zu, Zhaofu Zhang, Jianjun Sha, Yang Zhang, Hongfeng Dong, Nan Zhang, Shujing Zhang, Ning Zhang, Wenhao Yue und 7 weitere

Journal of Advanced Ceramics · 2026-07 · 15 (7) · 9221322

DOI: 10.26599/jac.2026.9221322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Ceramics, 2026-07. Verfasst von Lehao Liu und 18 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The ultrahigh sintering temperatures required for high-entropy borides (HEBs) pose a significant challenge to their processing and practical application. This study introduces an efficient low-temperature fabrication route for dense HEB-based ceramics using reactive ZrSi2-assisted heavy direct current sintering, with a maximum heating rate exceeding 3700 °C/min. A porosity of 1.60%±0.61% can be achieved at a sintering temperature of 1000 °C, which is reduced by 600–1000 °C compared to state-of-the-art spark plasma sintering (SPS)/field-assisted sintering technique (FAST) processing of HEBs. Microstructural analysis revealed interdiffusion between HEB and ZrSi2, leading to a core–shell HEB architecture and layered high-entropy silicides (HESs). Meanwhile, dislocations and nonuniform stress fields were observed within the HEB grains. These microstructural features synergistically inhibit crack propagation and promote crack deflection and branching. Consequently, both flexural strength and fracture toughness (KIC) are significantly enhanced. A flexural strength of 963 MPa was attained at 1400 °C, and a KIC of 7.4 MPa·m1/2 was achieved at 1500 °C, surpassing most reported HEB-based ceramics. These results demonstrate that reactive ZrSi2-assisted heavy direct current sintering is a profoundly effective approach for the low-temperature manufacturing of high-performance HEB-based ceramics.

Zitieren

APA

Liu, L., Liu, Y., Yao, Y., Zu, Y., Zhang, Z., Sha, J., Zhang, Y., Dong, H., Zhang, N., Zhang, S., Zhang, N., Yue, W., Zhang, Y., Cao, W., Hu, Y., An, R., Li, W., Zhu, L., & Ai, T. (2026). Ultrafast low-temperature fabrication of strong and tough high-entropy boride-based ceramics via reactive ZrSi 2 -assisted heavy direct current sintering. Journal of Advanced Ceramics, 15(7), 9221322. https://doi.org/10.26599/jac.2026.9221322

Vancouver

Liu L, Liu Y, Yao Y, Zu Y, Zhang Z, Sha J, et al. Ultrafast low-temperature fabrication of strong and tough high-entropy boride-based ceramics via reactive ZrSi 2 -assisted heavy direct current sintering. Journal of Advanced Ceramics. 2026;15(7):9221322. doi:10.26599/jac.2026.9221322

BibTeX
@article{Liu2026,
  author = {Liu, Lehao and Liu, Yingjun and Yao, Yuhan and Zu, Yufei and Zhang, Zhaofu and Sha, Jianjun and Zhang, Yang and Dong, Hongfeng and Zhang, Nan and Zhang, Shujing and Zhang, Ning and Yue, Wenhao and Zhang, Yibo and Cao, Wuhao and Hu, Yuan and An, Ruiheng and Li, Wenhu and Zhu, Luyi and Ai, Taotao},
  title = {Ultrafast low-temperature fabrication of strong and tough high-entropy boride-based ceramics via reactive ZrSi 2 -assisted heavy direct current sintering},
  journal = {Journal of Advanced Ceramics},
  year = {2026},
  volume = {15},
  number = {7},
  pages = {9221322},
  doi = {10.26599/jac.2026.9221322}
}
Kostenlos starten →