EUVIMEDEUVIMED entdecken
Crossref

Ultra-high piezoelectric properties of BiFeO 3 –BaTiO 3 lead-free piezoelectric ceramics enabled by a one-step sintering process

Shiyuan Zhang, Xianxin Zhang, Jinhao Hu, Jinweng Tao, Yuanbing Wang, Huajun Sun, Ali Shoaib, Jing-Feng Li, Bo-Ping Zhang

Journal of Advanced Ceramics · 2026-06 · 15 (6) · 9221302

DOI: 10.26599/jac.2026.9221302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Ceramics, 2026-06. Verfasst von Shiyuan Zhang und 8 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BiFeO3–BaTiO3 ceramics have been shown to possess considerable promise in the domain of high-temperature lead-free piezoelectric applications, a property attributable to their elevated Curie temperature and superior piezoelectric properties. However, the inherent issue of high leakage current within this system is a consequence of the unavoidable formation of secondary phases within thermodynamically unstable temperature ranges and the volatility of Bi. This issue severely compromises the high-temperature polarization stability and piezoelectric performance. This high conductance hinders the enhancement of the overall performance and obscures the evolution patterns of intrinsic defects and their influence mechanisms on macroscopic properties, necessitating in-depth investigation. The present study successfully prepared a series of BiFe1+xO3–BaTiO3 ceramics using a one-step sintering process. The Fe content was deliberately designed to exhibit both severe excess and deficiency states. It was found that the Fe non-stoichiometry-induced unique defect evolution behavior. A detailed investigation was conducted to ascertain the influence of the defect configuration on the electrical insulation properties across a range of temperatures and strain levels. The respective contributions of the defect-dipole- and space-charge-induced built-in electric fields to the strain response (before and after polarization) were also examined. It is noteworthy that the pure 0.7BiFeO3–0.3BaTiO3 system exhibits remarkable comprehensive properties at room temperature (piezoelectric constant d33* = 1021 pm/V, strain S ≈ 0.38%, and piezoelectric coefficient d33 = 201 pC/N). The material exhibits a high Curie temperature of approximately 501 °C, accompanied by a notable high-temperature piezoelectric activity. The peak d33 and d33* values are approximately 380 pC/N (measured at 317.9 °C) and 1481 pm/V (measured at 125 °C), respectively.

Zitieren

APA

Zhang, S., Zhang, X., Hu, J., Tao, J., Wang, Y., Sun, H., Shoaib, A., Li, J., & Zhang, B. (2026). Ultra-high piezoelectric properties of BiFeO 3 –BaTiO 3 lead-free piezoelectric ceramics enabled by a one-step sintering process. Journal of Advanced Ceramics, 15(6), 9221302. https://doi.org/10.26599/jac.2026.9221302

Vancouver

Zhang S, Zhang X, Hu J, Tao J, Wang Y, Sun H, et al. Ultra-high piezoelectric properties of BiFeO 3 –BaTiO 3 lead-free piezoelectric ceramics enabled by a one-step sintering process. Journal of Advanced Ceramics. 2026;15(6):9221302. doi:10.26599/jac.2026.9221302

BibTeX
@article{Zhang2026,
  author = {Zhang, Shiyuan and Zhang, Xianxin and Hu, Jinhao and Tao, Jinweng and Wang, Yuanbing and Sun, Huajun and Shoaib, Ali and Li, Jing-Feng and Zhang, Bo-Ping},
  title = {Ultra-high piezoelectric properties of BiFeO 3 –BaTiO 3 lead-free piezoelectric ceramics enabled by a one-step sintering process},
  journal = {Journal of Advanced Ceramics},
  year = {2026},
  volume = {15},
  number = {6},
  pages = {9221302},
  doi = {10.26599/jac.2026.9221302}
}
Kostenlos starten →