EUVIMEDEUVIMED entdecken
Crossref

Combining multiple strategies for fast densification and superior mechanical properties in 8YSZ with cold sintering pre-treatment

Sung-Hyun Kim, Sevag Momjian, Sang-Min Hong, Jong-Won Kim, Ha-Jin Gu, Young-Jae Kim, Ah-Hyeon Park, Muhammad Uzair, Pathan Sharief, Jeong-Min Park, Chung-Soo Kim, Kyung-Seok Moon und 3 weitere

Journal of Advanced Ceramics · 2026-05 · 15 (5) · 9221278

DOI: 10.26599/jac.2026.9221278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Ceramics, 2026-05. Verfasst von Sung-Hyun Kim und 14 weiteren Autor:innen. Die Arbeit nennt 63 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The cold sintering process (CSP), which has recently attracted significant research attention, is an emerging technique that enables the densification of high-melting-point ceramics at temperatures far lower than those required for conventional sintering (CS) by utilizing solvent-assisted mechanisms. In this study, CSP is employed as a pretreatment strategy for 8 mol% yttria-stabilized zirconia (8YSZ) to modify the initial microstructural and interfacial state prior to high-temperature sintering. In parallel, Fe2O3 was introduced as a sintering aid to enhance grain-boundary diffusion during the high-temperature stage. Rather than acting as an independent densification step, CSP establishes a path-dependent initial condition that governs the subsequent densification trajectory during conventional sintering. CSP at 180 °C for 1 h under a uniaxial pressure of 200 MPa, followed by postannealing at 1200 °C for 30 min, resulted in a high relative density of 98.11% theoretical density (TD). Depending on the type of solvent, the treated samples exhibited either a high Vickers hardness (Hv = 14.99 GPa) or a high fracture toughness (KIC = 5.56 MPa·m1/2), reflecting differences in grain growth mode and crack-path geometry. Stage-resolved densification kinetics were directly monitored using laser dilatometry, enabling the identification of pressure-driven rearrangement, solvent-mediated consolidation, and thermally activated diffusion contributions. The results demonstrate that CSP pretreatment governs the particle packing topology and interfacial chemistry, while Fe2O3 addition primarily amplifies high-temperature grain-boundary diffusion. This sequential coupling establishes a mechanistic framework for path-dependent densification in CSP-assisted ceramic processing.

Zitieren

APA

Kim, S., Momjian, S., Hong, S., Kim, J., Gu, H., Kim, Y., Park, A., Uzair, M., Sharief, P., Park, J., Kim, C., Moon, K., Guo, J., Randall, C. A., & Jeon, S. (2026). Combining multiple strategies for fast densification and superior mechanical properties in 8YSZ with cold sintering pre-treatment. Journal of Advanced Ceramics, 15(5), 9221278. https://doi.org/10.26599/jac.2026.9221278

Vancouver

Kim S, Momjian S, Hong S, Kim J, Gu H, Kim Y, et al. Combining multiple strategies for fast densification and superior mechanical properties in 8YSZ with cold sintering pre-treatment. Journal of Advanced Ceramics. 2026;15(5):9221278. doi:10.26599/jac.2026.9221278

BibTeX
@article{Kim2026,
  author = {Kim, Sung-Hyun and Momjian, Sevag and Hong, Sang-Min and Kim, Jong-Won and Gu, Ha-Jin and Kim, Young-Jae and Park, Ah-Hyeon and Uzair, Muhammad and Sharief, Pathan and Park, Jeong-Min and Kim, Chung-Soo and Moon, Kyung-Seok and Guo, Jing and Randall, Clive A. and Jeon, Sang-Chae},
  title = {Combining multiple strategies for fast densification and superior mechanical properties in 8YSZ with cold sintering pre-treatment},
  journal = {Journal of Advanced Ceramics},
  year = {2026},
  volume = {15},
  number = {5},
  pages = {9221278},
  doi = {10.26599/jac.2026.9221278}
}
Kostenlos starten →