EUVIMEDEUVIMED entdecken
Crossref

Atomic level manufacturing enables ultra-low friction and wear at elevated temperatures

Shehui Dang, Lei Chen, Pengfei Shi, Runzi Wang, Wumao Peng, Liang Jiang, Andreas Rosenkranz, Linmao Qian

Friction · 20.11.2026

DOI: 10.26599/frict.2026.9441339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Friction, online erschienen am 20.11.2026. Verfasst von Shehui Dang und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Toward the goal of achieving ultra-low friction and wear under elevated temperatures and high contact pressures in industrially relevant mechanical systems relying on liquid lubrication, we propose a synergistic lubrication strategy that integrates a close-to-atomically smooth surface as well as atomic-level modifications using a MXene coating and [HMIM][BF4] ionic liquid (IL). The ball-on-disc tribological test results demonstrate that this strategy led to ultra-low friction and wear of engineering steel interfaces at a high contact pressure of 1.13 GPa and an elevated temperature of 300 °C, demonstrating competitive lubrication performance relative to reported traditional oil-based and IL-based lubrication systems. The underlying mechanism enabling the superlative performance is attributed to a solid-liquid synergy since the close-to-atomic smooth steel surface not only mitigates direct load-bearing asperity contact at the sliding interface but also enhances the adhesion of MXenes to form a thicker, uniform composite tribofilm. In contrast, a higher steel roughness induces interfacial stress concentrations, leading to film delamination and failure. This template of lubrication strategy is anticipated to overcome the failure challenge of conventional liquid lubrication in extreme environments and provide a foundational roadmap for designing ultra-low friction and wear sliding systems operating under high-contact-pressure, high-temperature conditions relevant to industrial applications.

Zitieren

APA

Dang, S., Chen, L., Shi, P., Wang, R., Peng, W., Jiang, L., Rosenkranz, A., & Qian, L. (2026). Atomic level manufacturing enables ultra-low friction and wear at elevated temperatures. Friction. https://doi.org/10.26599/frict.2026.9441339

Vancouver

Dang S, Chen L, Shi P, Wang R, Peng W, Jiang L, et al. Atomic level manufacturing enables ultra-low friction and wear at elevated temperatures. Friction. 2026. doi:10.26599/frict.2026.9441339

BibTeX
@article{Dang2026,
  author = {Dang, Shehui and Chen, Lei and Shi, Pengfei and Wang, Runzi and Peng, Wumao and Jiang, Liang and Rosenkranz, Andreas and Qian, Linmao},
  title = {Atomic level manufacturing enables ultra-low friction and wear at elevated temperatures},
  journal = {Friction},
  year = {2026},
  doi = {10.26599/frict.2026.9441339}
}
Kostenlos starten →