From wall slip to intralayer shear: How surface asperities regulate friction in nanoconfined glycerol lubrication
Friction · 11.11.2026
DOI: 10.26599/frict.2026.9441337 ↗Kurz gefasst
Fachartikel in der Zeitschrift Friction, online erschienen am 11.11.2026. Verfasst von Hang Li und 8 weiteren Autor:innen.
Abstract (Originalsprache)
Reducing friction at the nanoscale to minimize energy losses remains a significant challenge, as a substantial amount of energy is currently lost to friction and wear at tribological contact interfaces. Here, a comprehensive physical understanding is provided of how the transition from smooth to rough interfaces alters slip modes and energy dissipation pathways in high-viscosity glycerol. Through nonequilibrium molecular dynamics simulations of glycerol confined between hydroxylated SiO2 and CH-terminated surfaces with controlled asperity heights (0–6.4 Å) and film thicknesses (2–8 molecular layers), we identify that surface asperity height serves as the key regulator for slip mode transition. The results reveal that the wall slip of lubricating film appears on the non-polar CH-terminated surface with low roughness (h ≤ 3.2 Å). Because only discrete asperity heights were examined, we believe that the transition occurs between the tested values of 3.2 and 4.8 Å, with a high-dissipation mixed mode involving wall slip and intralayer shear first observed at h = 4.8 Å. This transition leads to dramatic increases in both friction coefficient and heat dissipation rate, which rise by more than two orders of magnitude as h increases from 0 to 6.4 Å. Force analysis demonstrates that the increased friction resistance primarily originates from the “wedge effect” and lubricant accumulation in the uphill regions. These findings suggest that for high-viscosity lubricants like glycerol, minimizing asperity height to promote 2D-like interfacial slip represents a robust strategy for achieving heterogeneous interface superlubricity.
Zitieren
APA
Li, H., Yang, C., Xie, S., Shi, J., Fan, X., Cao, T., Zhao, B., Wang, J., & Feng, S. (2026). From wall slip to intralayer shear: How surface asperities regulate friction in nanoconfined glycerol lubrication. Friction. https://doi.org/10.26599/frict.2026.9441337
Vancouver
Li H, Yang C, Xie S, Shi J, Fan X, Cao T, et al. From wall slip to intralayer shear: How surface asperities regulate friction in nanoconfined glycerol lubrication. Friction. 2026. doi:10.26599/frict.2026.9441337
BibTeX
@article{Li2026,
author = {Li, Hang and Yang, Chen and Xie, Shijing and Shi, Junqin and Fan, Xiaoli and Cao, Tengfei and Zhao, Bin and Wang, Jie and Feng, Shaowei},
title = {From wall slip to intralayer shear: How surface asperities regulate friction in nanoconfined glycerol lubrication},
journal = {Friction},
year = {2026},
doi = {10.26599/frict.2026.9441337}
}
EUVIMED