EUVIMEDEUVIMED entdecken
Crossref

Effects of re-entrant auxetic structure on friction-induced vibrational behaviour of 3D printed PLA in sliding wear process

Yunxiang Deng, Yu Zhao, Boyang Wan, Li Chang

Friction · 2026-04 · 14 (4) · 9441172

DOI: 10.26599/frict.2025.9441172 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Friction, 2026-04. Verfasst von Yunxiang Deng und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present research investigates the effects of re-entrant auxetic structure’s on friction-induced vibrational behaviour of three-dimensional (3D) printed polylactic acid (PLA) samples. A series of re-entrant auxetic specimens with different re-entrant angles were prepared for sliding wear tests. The results showed that with the increase in re-entrant angles, the negative Poisson ratio becomes greater. Accordingly, the specimen showed less vibration during the sliding wear process, with a lower average friction coefficient. As a result, the wear resistance of the specimens with embedded re-entrant structures was clearly improved. Microscopic images revealed that surface fatigue wear was effectively prevented with the re-entrant structures, thanks to their energy absorption and vibration insulation capacities. The findings demonstrated that 3D printing technology could provide a new route for the design and fabrication of high wear resistant engineering components by creating complex functional structures to control and optimize their dynamic behaviour and, thus tribological performance.

Zitieren

APA

Deng, Y., Zhao, Y., Wan, B., & Chang, L. (2026). Effects of re-entrant auxetic structure on friction-induced vibrational behaviour of 3D printed PLA in sliding wear process. Friction, 14(4), 9441172. https://doi.org/10.26599/frict.2025.9441172

Vancouver

Deng Y, Zhao Y, Wan B, Chang L. Effects of re-entrant auxetic structure on friction-induced vibrational behaviour of 3D printed PLA in sliding wear process. Friction. 2026;14(4):9441172. doi:10.26599/frict.2025.9441172

BibTeX
@article{Deng2026,
  author = {Deng, Yunxiang and Zhao, Yu and Wan, Boyang and Chang, Li},
  title = {Effects of re-entrant auxetic structure on friction-induced vibrational behaviour of 3D printed PLA in sliding wear process},
  journal = {Friction},
  year = {2026},
  volume = {14},
  number = {4},
  pages = {9441172},
  doi = {10.26599/frict.2025.9441172}
}
Kostenlos starten →