Parametrické tepelné hodnotenie uchytenia zápornej DC zbernice pre nepriame monitorovanie teploty
Technológ · 2026 · 18 (1) · 40-43
DOI: 10.26552/tech.c.2026.1.7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Technológ, 2026. Verfasst von Martin Bučko und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This article analyzes the thermal response of a component used as a mounting fixture for the negative busbar of a direct current power system, employing indirect temperature measurement via a sensor placed at the end of the component. To quantify the temperature difference between the busbar’s contact surfaces and the measurement point, a series of 83 simulations was performed in ANSYS using the Transient Thermal module, covering a temperature range of 22 to 105°C. Boundary conditions, including convection, radiation, and the material properties of anodized aluminum, were defined for the simulation. The results revealed dynamic heattransfer behavior and enabled the creation of a parametric table that allows automatic conversion of the measured temperature to the actual busbar temperature. For higher accuracy, the temperature values can be further refined mathematically. This study provides a practical tool for temperature monitoring components, supports safety optimization, and contributes to vibration reduction in electrical systems.
Zitieren
APA
Bučko, M., Samaš, V., Slušňák, P., & Dižo, J. (2026). Parametrické tepelné hodnotenie uchytenia zápornej DC zbernice pre nepriame monitorovanie teploty. Technológ, 18(1), 40-43. https://doi.org/10.26552/tech.c.2026.1.7
Vancouver
Bučko M, Samaš V, Slušňák P, Dižo J. Parametrické tepelné hodnotenie uchytenia zápornej DC zbernice pre nepriame monitorovanie teploty. Technológ. 2026;18(1):40-43. doi:10.26552/tech.c.2026.1.7
BibTeX
@article{Buko2026,
author = {Bučko, Martin and Samaš, Vladimír and Slušňák, Patrik and Dižo, Ján},
title = {Parametrické tepelné hodnotenie uchytenia zápornej DC zbernice pre nepriame monitorovanie teploty},
journal = {Technológ},
year = {2026},
volume = {18},
number = {1},
pages = {40--43},
doi = {10.26552/tech.c.2026.1.7}
}
EUVIMED