CRYSTALLIZATION PROCESSES OF SOME AMORPHOUS ALLOYS
Materials and Corrosion Engineering Management · 2020
DOI: 10.26480/macem.02.2020.35.38 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials and Corrosion Engineering Management, 2020. Verfasst von W.Q. Yua und 1 weiteren Autor:innen.
Abstract (Originalsprache)
A series of Fe40Co40Zr8M2B10 (M=Nb, V, Cr, Ti, W, Al) alloys were prepared using melt-spinning. The thermal curve, structure and magnetic property of alloys are examined. Because of different negative heat of mixing between elements, only Fe40Co40Zr8M2B10 (M=Nb, V, Cr, Ti) alloys form amorphous structure. These amorphous alloys are annealed at different temperatures under vacuum conditions. The crystallization processes of four amorphous alloys are similar. In the primary stage of crystallization process, only α-Fe (Co) phase precipitates and Co element mainly distributes in the residual amorphous. For the four alloys after annealing at 550°C, there is a few differences in saturation magnetization (Ms) and coercivity (Hc) due to their different microstructures.
Zitieren
APA
Yua, W., & Lu, L. (2020). CRYSTALLIZATION PROCESSES OF SOME AMORPHOUS ALLOYS. Materials and Corrosion Engineering Management. https://doi.org/10.26480/macem.02.2020.35.38
Vancouver
Yua W, Lu L. CRYSTALLIZATION PROCESSES OF SOME AMORPHOUS ALLOYS. Materials and Corrosion Engineering Management. 2020. doi:10.26480/macem.02.2020.35.38
BibTeX
@article{Yua2020,
author = {Yua, W.Q. and Lu, L.P.},
title = {CRYSTALLIZATION PROCESSES OF SOME AMORPHOUS ALLOYS},
journal = {Materials and Corrosion Engineering Management},
year = {2020},
doi = {10.26480/macem.02.2020.35.38}
}
EUVIMED