Process–Structure–Property Optimisation of FDM-Printed TPU Shape-Memory Polymers for 4D Printing
AFRICAN JOURNAL OF APPLIED RESEARCH · 21.07.2026 · 12 (5) · 775-793
DOI: 10.26437/yd41zc93 ↗Kurz gefasst
Fachartikel in der Zeitschrift AFRICAN JOURNAL OF APPLIED RESEARCH, online erschienen am 21.07.2026. Verfasst von M. G. Trivedi und 1 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Purpose
Fused deposition modelling (FDM) of thermoplastic polyurethane (TPU) is a promising route for fabricating 4D-printed shape-memory structures, yet a systematic process–structure–property map that links build orientation and layer thickness to multi-response mechanical and thermo-mechanical performance has not been established for this material class. Design/Methodology/Approach: A 50-run full-factorial experiment was conducted on a single TPU 95A grade, varying X orientation, Y orientation (both at five levels: 0°, 22.5°, 45°, 67.5°, 90°) and layer thickness L (0.007 mm and 0.010 mm). Responses included ultimate tensile strength (UTS), compressive strength, bending response, notched Izod impact strength, fatigue, coefficient of thermal expansion, temperature-dependent Young’s modulus, and temperature-dependent creep. Data were analysed using descriptive statistics, type-II ANOVA with partial η² effect sizes, quadratic response-surface modelling, composite desirability optimisation, and random-forest machine-learning cross-validation. Research Limitation: The dataset is limited to a single TPU 95A grade under a 5×5×2 factorial design without replicate measurements; direct shape-memory metrics (shape-fixity ratio, shape-recovery ratio, actuation speed) were not measured in the current experimental campaign.
Findings
UTS ranged from 34.93 MPa (X = 90°, Y = 90°, L = 0.007 mm) to 39.23 MPa (X = 0°, Y = 0°, L = 0.007 mm). ANOVA identified Y orientation as the dominant tensile factor (F = 183.56, p < 0.001, η² = 0.958), followed by X orientation (F = 72.17, η² = 0.900) and layer thickness (F = 67.89, η² = 0.680); significant X×L and Y×L interactions confirmed that thickness effects are orientation-dependent. Quadratic response surfaces captured the design space with cross-validated R² = 0.933 (RMSE = 0.254 MPa), a result independently corroborated by a random-forest model (R² = 0.895, RMSE = 0.319 MPa) that reproduced the same factor ranking. Practical Implication: The validated process map allows engineers designing adaptive TPU structures to select build parameters from a data-driven design window (X ≈ 0°, Y ≈ 22°, L = 0.010 mm) rather than from isolated single-response experiments, reducing prototype iteration cycles for wearable assistive devices, soft-robotic actuators, and smart biomedical fixtures. Social Implication: The democratisation of FDM as a low-cost fabrication platform means that these guidelines are accessible to small research groups and resource-limited settings alike, supporting equitable access to advanced functional manufacturing for healthcare applications. Originality/Value: This study provides a validated, data-driven process map for FDM-printed TPU components intended for 4D and shape-memory applications.
Zitieren
APA
Trivedi, M. G., & Patil, C. R. (2026). Process–Structure–Property Optimisation of FDM-Printed TPU Shape-Memory Polymers for 4D Printing. AFRICAN JOURNAL OF APPLIED RESEARCH, 12(5), 775-793. https://doi.org/10.26437/yd41zc93
Vancouver
Trivedi MG, Patil CR. Process–Structure–Property Optimisation of FDM-Printed TPU Shape-Memory Polymers for 4D Printing. AFRICAN JOURNAL OF APPLIED RESEARCH. 2026;12(5):775-793. doi:10.26437/yd41zc93
BibTeX
@article{Trivedi2026,
author = {Trivedi, M. G. and Patil, C. R.},
title = {Process–Structure–Property Optimisation of FDM-Printed TPU Shape-Memory Polymers for 4D Printing},
journal = {AFRICAN JOURNAL OF APPLIED RESEARCH},
year = {2026},
volume = {12},
number = {5},
pages = {775--793},
doi = {10.26437/yd41zc93}
}
EUVIMED