An Advanced Multiphysics Numerical Framework for Cross-Flow Finned Heat Exchangers: Coupled Fluid–Solid Interaction and Thermal Optimisation
AFRICAN JOURNAL OF APPLIED RESEARCH · 04.07.2026 · 12 (5) · 159-186
DOI: 10.26437/jtdyfv73 ↗Kurz gefasst
Fachartikel in der Zeitschrift AFRICAN JOURNAL OF APPLIED RESEARCH, online erschienen am 04.07.2026. Verfasst von W. H. Al Doori und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Purpose
Therefore, the aim of this study is to develop and validate an advanced Multiphysics numerical framework capable of simultaneously analysing conjugate heat transfer (CHT) and one-way fluid–solid interaction (FSI) in finned cross-flow heat exchangers under realistic operating conditions. Design/Methodology/Approach: In this paper, coupled heat transfer and structural interaction for finned heat exchangers were studied using a detailed 3D numerical model. The finite-volume method and the SST k–ω turbulence model was employed. Considering realistic boundary conditions, the temperature-dependent material properties and interfacial resistance were modelled. Research Limitation: The present framework adopts a steady-state one-way FSI formulation and evaluates only selected geometric variables, namely fin spacing and fin height.
Findings
Validation against both analytical correlations and the manufacturer's data shows a solid fit, with a deviation of 11%. The assessment verified that the largest share of the total thermal resistance is due to air-side convection, while the contact-resistance component always remains around 10%. Modifications to the fin geometry showed that a height of 10 mm and a spacing of 3 mm are the best trade-off between flow resistance and heat transfer, and that overall effectiveness increases by about 12%. Practical Implication: The established framework provides a solid basis for further optimisation analyses and supports the design of cost-effective, low-energy heat exchanger construction. Social Implication: Enhanced exchanger performance can therefore support lower greenhouse gas emissions, reduced operational energy costs, and more sustainable thermal management infrastructure in the residential and industrial sectors. Originality / Value: Most numerical studies remain stuck in a heuristic paradigm and overlook real conditions such as no contact resistance at the fin-tube interface, uneven airflow, and the flow-induced structural mechanics of the system.
Zitieren
APA
Doori, W. H. A., Kumbhalkar, M. A., Sardeshmukh, M. M., Shaikh, S. W., Sargar, T. S., & Prayagi, S. V. (2026). An Advanced Multiphysics Numerical Framework for Cross-Flow Finned Heat Exchangers: Coupled Fluid–Solid Interaction and Thermal Optimisation. AFRICAN JOURNAL OF APPLIED RESEARCH, 12(5), 159-186. https://doi.org/10.26437/jtdyfv73
Vancouver
Doori WHA, Kumbhalkar MA, Sardeshmukh MM, Shaikh SW, Sargar TS, Prayagi SV. An Advanced Multiphysics Numerical Framework for Cross-Flow Finned Heat Exchangers: Coupled Fluid–Solid Interaction and Thermal Optimisation. AFRICAN JOURNAL OF APPLIED RESEARCH. 2026;12(5):159-186. doi:10.26437/jtdyfv73
BibTeX
@article{Doori2026,
author = {Doori, W. H. Al and Kumbhalkar, M. A. and Sardeshmukh, M. M. and Shaikh, S. W. and Sargar, T. S. and Prayagi, S. V.},
title = {An Advanced Multiphysics Numerical Framework for Cross-Flow Finned Heat Exchangers: Coupled Fluid–Solid Interaction and Thermal Optimisation},
journal = {AFRICAN JOURNAL OF APPLIED RESEARCH},
year = {2026},
volume = {12},
number = {5},
pages = {159--186},
doi = {10.26437/jtdyfv73}
}
EUVIMED