Comparative Study of Zn₂SnO₄, ZnO and SnO₂ Resistive Humidity Sensors and the Effect of Thermal Annealing on Zn₂SnO₄ Performance at Low Humidity
مجلة العلوم الطبيعية و الحياتية والتطبيقية · 15.06.2026 · 10 (2) · 21-29
DOI: 10.26389/ajsrp.d110426 ↗Kurz gefasst
Fachartikel in der Zeitschrift مجلة العلوم الطبيعية و الحياتية والتطبيقية, erschienen am 15.06.2026. Verfasst von Sarab Ahmad Al-Mirdash und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Metal oxide semiconductor-based humidity sensors often exhibit limited humidity sensing response at low concentrations and inadequate thermal stability, which restricts their practical applications. Although zinc stannate (Zn₂SnO₄, ZTO) has recently attracted attention as a promising sensing material, a systematic experimental comparison with conventional ZnO and SnO₂ sensors under identical conditions remains lacking. This study addresses this gap by investigating the structural and humidity sensing response of ZTO nanostructured thin films in direct comparison with ZnO and SnO₂. ZTO thin films were deposited via Spray Pyrolysis Deposition and subsequently annealed at 700 °C, while ZnO and SnO₂ films were prepared under comparable conditions. Structural characterization was performed using X-ray diffraction, and humidity sensing properties were evaluated at a low concentration of 100 ppm across a range of operating temperatures. The results demonstrate that ZTO crystallizes in a cubic spinel structure, whereas ZnO and SnO₂ exhibit hexagonal and tetragonal phases, respectively. Thermal annealing significantly enhanced crystallinity, increased crystallite size, and reduced structural defects, leading to markedly improved humidity sensing response. The annealed ZTO sensor achieved a maximum response of 188.57±1.89%, more than double that of the unannealed counterpart (90.76±2.75%), and substantially higher than ZnO and SnO₂ sensors under identical conditions. These improvements are attributed to the combined effects of increased surface activity, higher oxygen vacancy concentration, and synergistic interactions between Zn and Sn ions, which facilitate water adsorption and proton conduction. Overall, the findings highlight annealed Zn₂SnO₄ nanostructures as highly promising candidates for next-generation humidity sensors with enhanced sensitivity, stability, and reliability for environmental and industrial applications.
Zitieren
APA
Al-Mirdash, S. A., Al-Droubi, H. A., & Al-Baba, M. S. E. (2026). Comparative Study of Zn₂SnO₄, ZnO and SnO₂ Resistive Humidity Sensors and the Effect of Thermal Annealing on Zn₂SnO₄ Performance at Low Humidity. مجلة العلوم الطبيعية و الحياتية والتطبيقية, 10(2), 21-29. https://doi.org/10.26389/ajsrp.d110426
Vancouver
Al-Mirdash SA, Al-Droubi HA, Al-Baba MSE. Comparative Study of Zn₂SnO₄, ZnO and SnO₂ Resistive Humidity Sensors and the Effect of Thermal Annealing on Zn₂SnO₄ Performance at Low Humidity. مجلة العلوم الطبيعية و الحياتية والتطبيقية. 2026;10(2):21-29. doi:10.26389/ajsrp.d110426
BibTeX
@article{AlMirdash2026,
author = {Al-Mirdash, Sarab Ahmad and Al-Droubi, Huda AbdAlMohaimen and Al-Baba, Mohammed Samer Ehsan},
title = {Comparative Study of Zn₂SnO₄, ZnO and SnO₂ Resistive Humidity Sensors and the Effect of Thermal Annealing on Zn₂SnO₄ Performance at Low Humidity},
journal = {مجلة العلوم الطبيعية و الحياتية والتطبيقية},
year = {2026},
volume = {10},
number = {2},
pages = {21--29},
doi = {10.26389/ajsrp.d110426}
}
EUVIMED