Fabrication and characterization of superhydrophobic cocopeat aerogel for the remediation of simulated crude oil spill
Research Journal of Chemistry and Environment · 30.04.2026 · 6 (30) · 61
DOI: 10.25303/306rjce061070 ↗Kurz gefasst
Fachartikel in der Zeitschrift Research Journal of Chemistry and Environment, online erschienen am 30.04.2026. Verfasst von Sreechithra M. und 2 weiteren Autor:innen.
Abstract (Originalsprache)
This research examines the design and production of cocopeat aerogel, which is derived from raw cocopeat via a chemical pretreatment method utilizing a NaOH/Polyethylene glycol solution. The pretreated mixture underwent a series of thawing and deep-freezing processes, which improved the hydrophobic characteristics of the natural fibre and aided in the development of a three-dimensional porous structure within the cocopeat aerogel. The structural and physicochemical properties of the produced cocopeat aerogel were thoroughly analyzed using Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric analysis (TG, DTG, and DTA). Image processing of a simulated oil spill was conducted using MATLAB. A representative experimental model was created, and cocopeat aerogel mesh was utilized as the adsorbent for the removal of crude oil. The effects of key adsorption parameters, specifically contact time, sorbent dosage, and initial crude oil concentration, were systematically examined concerning the sorption capacity and oil recovery efficiency of the cocopeat aerogel. Additionally, a comparative assessment of the adsorption performance between raw cocopeat and cocopeat aerogel was performed through reusability studies to evaluate their regeneration potential. The highest oil adsorption capacity recorded was 27,400 mg of oil per gram of adsorbent. The experimental design and optimization of process parameters were executed using the Box Behnken design implemented in Minitab 19.
Zitieren
APA
M., S., Madhu, G., & Pawels, R. (2026). Fabrication and characterization of superhydrophobic cocopeat aerogel for the remediation of simulated crude oil spill. Research Journal of Chemistry and Environment, 6(30), 61. https://doi.org/10.25303/306rjce061070
Vancouver
M. S, Madhu G, Pawels R. Fabrication and characterization of superhydrophobic cocopeat aerogel for the remediation of simulated crude oil spill. Research Journal of Chemistry and Environment. 2026;6(30):61. doi:10.25303/306rjce061070
BibTeX
@article{M2026,
author = {M., Sreechithra and Madhu, G. and Pawels, Renu},
title = {Fabrication and characterization of superhydrophobic cocopeat aerogel for the remediation of simulated crude oil spill},
journal = {Research Journal of Chemistry and Environment},
year = {2026},
volume = {6},
number = {30},
pages = {61},
doi = {10.25303/306rjce061070}
}
EUVIMED