EUVIMEDEUVIMED entdecken
Crossref

The Effect of Variations in Mixtures of Copper and Graphite Powder on Electrical Conductivity, Bending Strength, and Microstructure of Polymer Conductor Plates

Hamdi Thaib, Dedikarni Panuh

Journal of Renewable Energy and Mechanics · 31.03.2026 · 9 (01) · 86-102

DOI: 10.25299/rem.2026.20838 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Renewable Energy and Mechanics, online erschienen am 31.03.2026. Verfasst von Hamdi Thaib und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer conductor plates are made from a Polymer Matrix Composite (PMC) comprising non-metallic particles and a polymer matrix. One effective conductor of electric current is copper. This study was conducted to investigate how different mixtures of copper and graphite powder affect electrical conductivity, bending strength, and microstructure of the polymer conductor plate. The study tested various mixtures of copper powder, graphite, and epoxy resin in proportions of 15%: 75%: 10%, 20%: 70%: 10%, and 25%: 65%: 10%. The highest electrical conductivity and bending strength were observed in sample 3, which contained 25% copper powder, 65% graphite, and 10% epoxy resin. For comparison, a pure copper (100%) reference sample was also tested, yielding an electrical conductivity of 6.25 S/cm as a benchmark for the maximum achievable value. This is due to the greater amount of copper powder, which reduces resistance in the polymer conductor plate. Lower resistance in the polymer conductor plate allows easier current flow; thus, lower resistivity enhances its electrical conductivity. A high bending strength is achieved because copper is a malleable metal that can withstand directional loads. This is evident from the microstructure test results, where a higher copper content correlates with higher electrical conductivity and bending strength.

Zitieren

APA

Thaib, H., & Panuh, D. (2026). The Effect of Variations in Mixtures of Copper and Graphite Powder on Electrical Conductivity, Bending Strength, and Microstructure of Polymer Conductor Plates. Journal of Renewable Energy and Mechanics, 9(01), 86-102. https://doi.org/10.25299/rem.2026.20838

Vancouver

Thaib H, Panuh D. The Effect of Variations in Mixtures of Copper and Graphite Powder on Electrical Conductivity, Bending Strength, and Microstructure of Polymer Conductor Plates. Journal of Renewable Energy and Mechanics. 2026;9(01):86-102. doi:10.25299/rem.2026.20838

BibTeX
@article{Thaib2026,
  author = {Thaib, Hamdi and Panuh, Dedikarni},
  title = {The Effect of Variations in Mixtures of Copper and Graphite Powder on Electrical Conductivity, Bending Strength, and Microstructure of Polymer Conductor Plates},
  journal = {Journal of Renewable Energy and Mechanics},
  year = {2026},
  volume = {9},
  number = {01},
  pages = {86--102},
  doi = {10.25299/rem.2026.20838}
}
Kostenlos starten →