Application Of Computed Tomography-Based Three-Dimensional Reconstruction Compensation Strategy for Femoral Rotational Morphology in Precise Alignment of Total Knee Arthroplasty: A Simulation Study
Journal of Orthopaedics · 20.11.2026 · 80 · 31-38
DOI: 10.25259/joo_136_2026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Orthopaedics, online erschienen am 20.11.2026. Verfasst von Yiqun Han und 1 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.
Abstract (Originalsprache)
Objectives
To investigate, through computer simulation, whether the intraoperative femoral morphology in total knee arthroplasty (TKA) can be predicted from the initial pre-resection plane, and to calculate the theoretical compensation angle required for the secondary resection to align the osteotomy plane with the surgical transepicondylar axis (sTEA). Material and Methods: Preoperative CT data from 130 patients with varus knee osteoarthritis were utilized for three-dimensional reconstruction and osteotomy simulation. The final osteotomy plane was defined on the sagittal view as the most distal position where the anterior femoral cortex remains intact (no notching). On the axial view, this final plane was externally rotated 4° relative to the posterior condylar axis (PCA), based on the mean posterior condylar angle of 4° ± 1.4° reported in a large CT-based anthropometric study of 2,637 knees and translated 2 mm anteriorly to define the precutting plane. All initial osteotomies were performed on this pre-resection plane. According to the proposed criteria, the morphology was classified into three groups based on the ratio of medial to lateral vertical diameters (M/L) of the pre-resection plane: Piano sign group (M/L: 0.62–0.67, n= 45), Boot sign group (M/L < 0.62, n= 50), and Butterfly sign group (M/L > 0.67, n= 35). For the non-ideal groups (Boot and Butterfly), the angle between the osteotomy plane and the surgical transepicondylar axis (sTEA) was calculated and defined as the compensation angle. Furthermore, an axial geometric model was constructed to calculate the maximum adjustment angles permitted by the medial and lateral femoral cortices (α-medial and α-lateral) during the transition from the precutting to the final osteotomy plane, thereby verifying whether a 2 mm resection provides sufficient geometric space for compensation.
Results
A total of 130 varus knee osteoarthritis patients' CT data were included. Based on the M/L ratio of the pre-resection plane, patients were divided into three groups: Piano sign (n=45, 34.6%), Boot sign (n=50, 38.5%), Butterfly sign (n=35, 26.9%). In total, 65.4% (85/130) of patients did not exhibit the ideal piano sign morphology after 4° external rotation based on PCA in the pre-resection . Baseline demographic data were as follows: the mean age was 66.9 ± 6.2 years, with 62 males (47.7%) and 68 females (52.3%). In the piano sign group, the mean age was 66.4 ± 6.5 years (21 males, 24 females); in the boot sign group, 66.5 ± 5.8 years (24 males, 26 females); and in the butterfly sign group, 68.0 ± 6.3 years (17 males, 18 females). Age showed no significant correlation with any of the measured angles ( p > 0.05), and there were no significant differences between males and females ( p > 0.05). Geometric measurements based on the precutting plane: Piano sign group: angle between osteotomy plane and sTEA was 0.10 ± 0.07° (95% CI: 0.08 to 0.12). Boot sign group: required internal rotation compensation; average deviation from sTEA was -1.04 ± 0.14° (95% CI: -1.08 to -1.00). Butterfly sign group: required external rotation compensation; average deviation from sTEA was 1.43 ± 0.13° (95% CI: 1.39 to 1.47)
Conclusion
Under the specific assumptions of this simulation, after pre-resection, increasing (-1.04 ± 0.14)° or decreasing (1.43 ± 0.13)° according to the anterior condylar morphology to achieve the piano sign may help achieve an external rotation angle closer to the transepicondylar axis. In this model, the 2 mm resection can provide sufficient theoretical adjustment space.
Zitieren
APA
Han, Y., & Yan, X. (2026). Application Of Computed Tomography-Based Three-Dimensional Reconstruction Compensation Strategy for Femoral Rotational Morphology in Precise Alignment of Total Knee Arthroplasty: A Simulation Study. Journal of Orthopaedics, 80, 31-38. https://doi.org/10.25259/joo_136_2026
Vancouver
Han Y, Yan X. Application Of Computed Tomography-Based Three-Dimensional Reconstruction Compensation Strategy for Femoral Rotational Morphology in Precise Alignment of Total Knee Arthroplasty: A Simulation Study. Journal of Orthopaedics. 2026;80:31-38. doi:10.25259/joo_136_2026
BibTeX
@article{Han2026,
author = {Han, Yiqun and Yan, Xinfeng},
title = {Application Of Computed Tomography-Based Three-Dimensional Reconstruction Compensation Strategy for Femoral Rotational Morphology in Precise Alignment of Total Knee Arthroplasty: A Simulation Study},
journal = {Journal of Orthopaedics},
year = {2026},
volume = {80},
pages = {31--38},
doi = {10.25259/joo_136_2026}
}
EUVIMED