EUVIMEDEUVIMED entdecken
Crossref

Design and Development of a Fully Automatic Pneumatic Water Pumping System Using Air Power

Karthik G, Vairamani G, Karthikeyan V, Chandru K, Manoj G, Vetrivelan D

International Journal of Drug Delivery Technology · 09.06.2026 · 16 (47s)

DOI: 10.25258/ijddt.16.47s.124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Drug Delivery Technology, online erschienen am 09.06.2026. Verfasst von Karthik G und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Access to reliable and cost-effective water pumping remains a critical challenge in rural, agricultural, and off-grid regions globally. Conventional electrically driven and fuel-based pumps present well-documented limitations including high energy consumption, greenhouse gas emissions, dependency on grid connectivity, and elevated operational expenditure. This paper presents the design and development of a Fully Automatic Pneumatic Water Pumping System (FAPWPS) powered by compressed air, built on a radial plunger reciprocating mechanism. The system employs a double-acting pneumatic cylinder actuated by a 5/2 solenoid directional control valve, which is autonomously governed by an adjustable 6–30V single-channel relay timing module to establish continuous, operator-free reciprocating piston motion. A hydraulic pumping chamber fitted with non-return check valves converts the piston's linear mechanical stroke into unidirectional water flow. System operation requires only a 12V, 2A DC power adapter for control electronics, with compressed air constituting the primary energy medium. Experimental characterization confirms controllable discharge rates across the relay timing range, reliable automatic cyclic operation, and total system fabrication cost of approximately ₹10,000 — representing a substantial cost reduction compared to commercially available alternatives. The FAPWPS demonstrates practical viability for small-scale irrigation, rural domestic water supply, and industrial fluid transfer applications, while establishing a hardware foundation extensible to IoT-based smart monitoring and multi-stage pumping configurations.

Zitieren

APA

G, K., G, V., V, K., K, C., G, M., & D, V. (2026). Design and Development of a Fully Automatic Pneumatic Water Pumping System Using Air Power. International Journal of Drug Delivery Technology, 16(47s). https://doi.org/10.25258/ijddt.16.47s.124

Vancouver

G K, G V, V K, K C, G M, D V. Design and Development of a Fully Automatic Pneumatic Water Pumping System Using Air Power. International Journal of Drug Delivery Technology. 2026;16(47s). doi:10.25258/ijddt.16.47s.124

BibTeX
@article{G2026,
  author = {G, Karthik and G, Vairamani and V, Karthikeyan and K, Chandru and G, Manoj and D, Vetrivelan},
  title = {Design and Development of a Fully Automatic Pneumatic Water Pumping System Using Air Power},
  journal = {International Journal of Drug Delivery Technology},
  year = {2026},
  volume = {16},
  number = {47s},
  doi = {10.25258/ijddt.16.47s.124}
}
Kostenlos starten →