Topology Optimization of a 3D Printed Polymer Bracket with AdditiveManufacturing Constraints under Static Loading
International Journal of Drug Delivery Technology · 30.04.2026 · 16 (41s)
DOI: 10.25258/ijddt.16.41s.4 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Drug Delivery Technology, online erschienen am 30.04.2026. Verfasst von Rajasekar K und 5 weiteren Autor:innen.
Abstract (Originalsprache)
The growing demand for lightweight, high-performance structural components has led to the integration of topologyoptimization and additive manufacturing (AM) technologies. This project focuses on the design and optimization of a3D-printed polymer bracket subjected to static loading conditions while incorporating key additive manufacturingconstraints. The primary objective is to minimize material usage and weight while maintaining structural integrity,stiffness, and manufacturability.Initially, a baseline bracket geometry is developed using CAD software, followed by thedefinition of boundary conditions, loading scenarios, and material properties for a selected polymer (e.g., ABS, PLA, orPETG). A finite element analysis (FEA) is conducted to evaluate stress distribution, deformation, and factor of safetyunder static loading. Subsequently, topology optimization is performed with the objective of minimizing compliance(maximizing stiffness) under a specified volume reduction constraint.To ensure manufacturability via additivemanufacturing, critical constraints such as minimum member size, overhang angle limitations, and self-supportinggeometry are incorporated into the optimization process. These constraints help eliminate impractical geometries thatwould require excessive support structures or result in poor print quality. The optimized design is then reconstructed intoa smooth, printable geometry and validated through further FEA simulations.The final design is fabricated using asuitable 3D printing technique such as Fused Deposition Modeling (FDM). Experimental validation is carried outthrough static load testing, and results are compared with numerical predictions. Key performance indicators includeweight reduction, stress distribution, displacement, and structural efficiency.The study demonstrates that integratingtopology optimization with AM constraints can significantly reduce material usage while maintaining or improvingmechanical performance. This approach enables the development of efficient, lightweight polymer components suitablefor engineering applications such as automotive brackets, consumer products, and support structures.
Zitieren
APA
K, R., V, A. P., P, R., A, C. P., P, N., & M, N. (2026). Topology Optimization of a 3D Printed Polymer Bracket with AdditiveManufacturing Constraints under Static Loading. International Journal of Drug Delivery Technology, 16(41s). https://doi.org/10.25258/ijddt.16.41s.4
Vancouver
K R, V AP, P R, A CP, P N, M N. Topology Optimization of a 3D Printed Polymer Bracket with AdditiveManufacturing Constraints under Static Loading. International Journal of Drug Delivery Technology. 2026;16(41s). doi:10.25258/ijddt.16.41s.4
BibTeX
@article{K2026,
author = {K, Rajasekar and V, Ashok pandi and P, Raju and A, Captan Prabakaran and P, Naveenkumar and M, Nagenthiran},
title = {Topology Optimization of a 3D Printed Polymer Bracket with AdditiveManufacturing Constraints under Static Loading},
journal = {International Journal of Drug Delivery Technology},
year = {2026},
volume = {16},
number = {41s},
doi = {10.25258/ijddt.16.41s.4}
}
EUVIMED