Effect of Different Concentrations of Eggshell-Derived Hydroxyapatite Nanoparticles on the Flexural Strength of PMMA Denture Base Resin: An In Vitro Study
International Journal of Drug Delivery Technology · 28.04.2026 · 16 (22s)
DOI: 10.25258/ijddt.16.22s.63 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Drug Delivery Technology, online erschienen am 28.04.2026. Verfasst von Asma Siddiqui und 5 weiteren Autor:innen.
Abstract (Originalsprache)
Objective
Polymethyl methacrylate (PMMA) is the most commonly used denture base material due to its favorable esthetic and handling properties; however, its relatively low flexural strength predisposes it to fracture under functional stresses. Reinforcement using nanoparticle fillers has been proposed to improve its mechanical performance. This study evaluated the effect of eggshell powder and hydroxyapatite nanoparticles derived from burned eggshell on the flexural strength of PMMA denture base resin at different concentrations. Materials and Methods A total of 45 rectangular specimens of heat-polymerized PMMA were fabricated and divided into nine groups (n = 5): Group A (control, 100% PMMA), Groups B1–B4 reinforced with eggshell powder (1%, 3%, 5%, and 7%), and Groups C1–C4 reinforced with hydroxyapatite derived from burned eggshell at corresponding concentrations. Specimens were prepared according to ASTM standards and subjected to a three-point bending test using a universal testing machine. Flexural strength was calculated in megapascals (MPa). Data were analyzed using one-way analysis of variance (ANOVA) followed by Tukey post hoc test (α = 0.05).
Results
All reinforced groups demonstrated higher flexural strength compared with the control group. The highest mean flexural strength was observed in Group C2 (3% hydroxyapatite derived from burned eggshell) (111.2 ± 6.1 MPa), followed by Group C3 (5% hydroxyapatite) and Group B2 (3% eggshell powder). One-way analysis of variance (ANOVA) revealed a statistically significant difference among groups (P < .001). Tukey post hoc test showed that the control group had significantly lower flexural strength than all experimental groups (P < .05), while Group C2 demonstrated significantly higher values compared with all other groups (P < .05). Hydroxyapatite-reinforced groups exhibited significantly greater flexural strength than corresponding eggshell powder groups. Increasing filler concentration up to 3% significantly improved flexural strength, whereas further increase to 5% and 7% resulted in a non-significant reduction.
Conclusions
Incorporation of both eggshell powder and hydroxyapatite derived from burned eggshell improved the flexural strength of PMMA denture base resin; however, hydroxyapatite from burned eggshell demonstrated superior reinforcement. The maximum flexural strength was achieved at 3% hydroxyapatite (Group C2), indicating that this concentration provides optimal mechanical performance. Eggshell-derived hydroxyapatite may serve as a cost-effective, sustainable, and clinically relevant reinforcing material for denture base applications.
Zitieren
APA
Siddiqui, A., Ahmad, A., Ali, M. Y., Naveed, S., Fayyaz, M. T., & Hussain, M. (2026). Effect of Different Concentrations of Eggshell-Derived Hydroxyapatite Nanoparticles on the Flexural Strength of PMMA Denture Base Resin: An In Vitro Study. International Journal of Drug Delivery Technology, 16(22s). https://doi.org/10.25258/ijddt.16.22s.63
Vancouver
Siddiqui A, Ahmad A, Ali MY, Naveed S, Fayyaz MT, Hussain M. Effect of Different Concentrations of Eggshell-Derived Hydroxyapatite Nanoparticles on the Flexural Strength of PMMA Denture Base Resin: An In Vitro Study. International Journal of Drug Delivery Technology. 2026;16(22s). doi:10.25258/ijddt.16.22s.63
BibTeX
@article{Siddiqui2026,
author = {Siddiqui, Asma and Ahmad, Affan and Ali, Muhammad Yousuf and Naveed, Sanober and Fayyaz, Muhammad Tariq and Hussain, Mehmood},
title = {Effect of Different Concentrations of Eggshell-Derived Hydroxyapatite Nanoparticles on the Flexural Strength of PMMA Denture Base Resin: An In Vitro Study},
journal = {International Journal of Drug Delivery Technology},
year = {2026},
volume = {16},
number = {22s},
doi = {10.25258/ijddt.16.22s.63}
}
EUVIMED