EUVIMEDEUVIMED entdecken
Crossref

Computational Modelling and Structural Optimization of Hybrid Composite Materials for Lightweight Mechanical Components

Dr. Jugulkar Lalitkumar Maikulal, Dr. Marripalli Pavani, Dr. Shivaji Suryabhan Aher, Dr.S. Rajanarayanan, Dr. Rajendra Himmatrao Shinde, Dr. Navneetsinh Shivkumar Yadav

International Journal of Drug Delivery Technology · 25.04.2026 · 16 (20s)

DOI: 10.25258/ijddt.16.20s.55 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Drug Delivery Technology, online erschienen am 25.04.2026. Verfasst von Dr. Jugulkar Lalitkumar Maikulal und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid composite materials are a potential path to achieving lightweight structural components with high performance, and this research disseminates a computational framework based on Python to model and optimize carbon–glass hybrid laminates. By micromechanics and Classical Laminate Theory, lamina moduli of 98.48 GPa for carbon/epoxy and 49.25 GPa for glass/epoxy were derived and used in the model of an eight-ply symmetric laminate. The baseline laminate, under an in-plane tensile load of 50 kN/m, showed mid-plane strains of 0.0015 in the axial direction, axial stresses of 141.68 MPa in carbon plies and 70.15 MPa in glass plies, and a maximum Tsai–Wu failure index of 0.009, thus confirming safe elastic behavior. The comparative evaluation revealed that the hybrid laminate had a modulus of the axial direction of 66– 70 GPa, which is a value between those of all-glass (49.62 GPa) and all-carbon (98.91 GPa) structures, while the massper-area was less than that of glass laminates. A discrete optimization search of 256 designs for the best sequence ["G"/"C"/"C"/"G" ]_s led to the achievement of an improved axial modulus of 74.26 GPa, the reduction of the mass to 2.14 kg/m², and the uniform Tsai–Wu index of −0.038 in all plies. The findings provide evidence that hybrid laminate design through computation can not only stiffen the laminate-to-weight ratio but can also lower the risk of failure and decrease the need for physical prototyping extensively in the field of lightweight structural applications.

Zitieren

APA

Maikulal, D. J. L., Pavani, D. M., Aher, D. S. S., Rajanarayanan, D., Shinde, D. R. H., & Yadav, D. N. S. (2026). Computational Modelling and Structural Optimization of Hybrid Composite Materials for Lightweight Mechanical Components. International Journal of Drug Delivery Technology, 16(20s). https://doi.org/10.25258/ijddt.16.20s.55

Vancouver

Maikulal DJL, Pavani DM, Aher DSS, Rajanarayanan D, Shinde DRH, Yadav DNS. Computational Modelling and Structural Optimization of Hybrid Composite Materials for Lightweight Mechanical Components. International Journal of Drug Delivery Technology. 2026;16(20s). doi:10.25258/ijddt.16.20s.55

BibTeX
@article{Maikulal2026,
  author = {Maikulal, Dr. Jugulkar Lalitkumar and Pavani, Dr. Marripalli and Aher, Dr. Shivaji Suryabhan and Rajanarayanan, Dr.S. and Shinde, Dr. Rajendra Himmatrao and Yadav, Dr. Navneetsinh Shivkumar},
  title = {Computational Modelling and Structural Optimization of Hybrid Composite Materials for Lightweight Mechanical Components},
  journal = {International Journal of Drug Delivery Technology},
  year = {2026},
  volume = {16},
  number = {20s},
  doi = {10.25258/ijddt.16.20s.55}
}
Kostenlos starten →