Methodology for determining heat release characteristics and selecting fire source models typical for quarry equipment
FIRE AND EMERGENCIES: PREVENTION, ELIMINATION · 2026 · 1 · 64-71
DOI: 10.25257/fe.2026.1.64-71 ↗Kurz gefasst
Fachartikel in der Zeitschrift FIRE AND EMERGENCIES: PREVENTION, ELIMINATION, 2026. Verfasst von Evgenii Yu. KRUGLOV und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Purpose
Quarry dump trucks pose a high fire risk due to the significant quantities of combustible materials present in their engine compartments. This paper presents a methodology for determining heat release characteristics and selecting model fire sources that correspond to actual fire scenarios in quarry equipment, aimed at evaluating the performance of automatic fire suppression systems.
Methods
Based on the analysis of fire statistics and design features of engine compartments, stationary and dynamic model fire sources simulating fuel and oil spills were proposed. Calculations of the mass burning rate, heat release rate (HRR), and burn time for diesel fuel and gasoline mixtures were performed. Experimental studies were carried out using a flow calorimeter in accordance with GOST R 57928–2017.
Findings
Heat release parameters for model fire sources with dimensions of 200×200 mm and 300×300 mm have been determined. It has also been established that four fire sources measuring 200×200 mm provide a heat release rate of 448 kW, while those measuring 300×300 mm provide 1,004 kW. The experimentally obtained values of the effective heat of combustion for the mixtures are 32.9 MJ/kg and 39 MJ/kg, respectively, which is consistent with the calculated data. Research application field. The developed methodology can be applied to simulate fires in the engine compartments of quarry equipment, to test and optimize automatic fire suppression systems, and to conduct research on the fire safety of heavy-duty vehicles.
Conclusions
The proposed approach enables an adequate description of combustion processes in model fire sources and provides a substantiated selection of fire load for simulating real-world conditions. The obtained data can be used for further research and the development of effective fire protection measures for quarry transport.
Zitieren
APA
KRUGLOV, E. Y., & RUZANOVA, O. I. (2026). Methodology for determining heat release characteristics and selecting fire source models typical for quarry equipment. FIRE AND EMERGENCIES: PREVENTION, ELIMINATION, 1, 64-71. https://doi.org/10.25257/fe.2026.1.64-71
Vancouver
KRUGLOV EY, RUZANOVA OI. Methodology for determining heat release characteristics and selecting fire source models typical for quarry equipment. FIRE AND EMERGENCIES: PREVENTION, ELIMINATION. 2026;1:64-71. doi:10.25257/fe.2026.1.64-71
BibTeX
@article{KRUGLOV2026,
author = {KRUGLOV, Evgenii Yu. and RUZANOVA, Olga I.},
title = {Methodology for determining heat release characteristics and selecting fire source models typical for quarry equipment},
journal = {FIRE AND EMERGENCIES: PREVENTION, ELIMINATION},
year = {2026},
volume = {1},
pages = {64--71},
doi = {10.25257/fe.2026.1.64-71}
}
EUVIMED