EUVIMEDEUVIMED entdecken
Crossref

Perancangan Area Incoming Material Berbasis 5S Untuk Mengurangi Waste of Motion pada PT XYZ

Andre Sugioko, Trifenaus Prabu Hidayat, Vania Ananda Mustika

Jurnal Praktik Keinsinyuran · 02.11.2026 · 3 (06) · 689-703

DOI: 10.25170/jpk.v3i06.8409 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Praktik Keinsinyuran, online erschienen am 02.11.2026. Verfasst von Andre Sugioko und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PT XYZ is a manufacturing company engaged in the fabrication and integration of electrical systems with a Make to Order (MTO) production system. Currently, the company's incoming material area does not have a standardized arrangement system, so electrical components are placed without clear classification and labeling. An evaluation of existing conditions was carried out using a 5S audit and observation of material search time for 25 actual working days. The audit results showed a 5S achievement percentage of 20.8%, with the Seiton element as the most critical at 6.3%, Meanwhile, the average time spent searching for materials, based on 42 observed samples, was recorded at 5.83 minutes per visit, resulting in a waste of 69.96 minutes per day—or 16.7% of total effective working hours. Based on these results, improvements are proposed through the design of floor marking with a division of three zones and a configuration of 10 vertical storage rack units with a total surface capacity of 24.00 m², equipped with a labeling system per slot. Based on the trial results, the implementation of both proposed improvements is projected to reduce material search time by up to 60%, resulting in a savings of 42.00 minutes per day or an equivalent of 10.0% of the daily effective working hours that can be diverted to productive activities.

Zitieren

APA

Sugioko, A., Hidayat, T. P., & Mustika, V. A. (2026). Perancangan Area Incoming Material Berbasis 5S Untuk Mengurangi Waste of Motion pada PT XYZ. Jurnal Praktik Keinsinyuran, 3(06), 689-703. https://doi.org/10.25170/jpk.v3i06.8409

Vancouver

Sugioko A, Hidayat TP, Mustika VA. Perancangan Area Incoming Material Berbasis 5S Untuk Mengurangi Waste of Motion pada PT XYZ. Jurnal Praktik Keinsinyuran. 2026;3(06):689-703. doi:10.25170/jpk.v3i06.8409

BibTeX
@article{Sugioko2026,
  author = {Sugioko, Andre and Hidayat, Trifenaus Prabu and Mustika, Vania Ananda},
  title = {Perancangan Area Incoming Material Berbasis 5S Untuk Mengurangi Waste of Motion pada PT XYZ},
  journal = {Jurnal Praktik Keinsinyuran},
  year = {2026},
  volume = {3},
  number = {06},
  pages = {689--703},
  doi = {10.25170/jpk.v3i06.8409}
}
Kostenlos starten →