EUVIMEDEUVIMED entdecken
Crossref

Enhancing Thermal Performance of Pin-Fin Heat Sinks Through Slot Orientation Modifications

Ferhat Koca, Ayhan Bekki, Recai Özcan

Journal of Thermophysics and Heat Transfer · 2026-04 · 40 (2) · 465-477

DOI: 10.2514/1.t7298 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermophysics and Heat Transfer, 2026-04. Verfasst von Ferhat Koca und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 57 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the influence of slot placement variations on heat transfer and fluid flow in a pin-fin heat sink was analyzed. Four different configurations were created by considering circular fins whose number and position were kept constant: solid flat (Base Config), flow-parallel slotted (Config A), 45° inclined slotted to the flow direction (Config B), and mixed (cross) slotted with 45° angles to the right and left (Config C). The analyses were carried out using the three-dimensional computational fluid dynamics (CFD) approach with Ansys Fluent software; the realizable [Formula: see text] model was preferred for turbulence modeling. The analyses were repeated for all configurations according to four different Reynolds numbers calculated at 4, 8, 10, and [Formula: see text] air flow rates; the boundary conditions were determined as constant heat flux, no-slip condition, conjugate heat transfer, and adiabatic outer walls. In the study, the Nusselt number, surface friction coefficient, temperature values, pressure drop, and performance evaluation criterion (PEC) were analyzed. The results show that increasing fluid contact by opening slots and increasing turbulence by giving an angle according to the flow direction increase thermal performance. While Config A stands out with a PEC number of 1.45 compared to Base Config at the lowest air flow rate, Config C was obtained as the most effective pin-fin configuration with a PEC number of 1.38 at the highest air flow rate.

Zitieren

APA

Koca, F., Bekki, A., & Özcan, R. (2026). Enhancing Thermal Performance of Pin-Fin Heat Sinks Through Slot Orientation Modifications. Journal of Thermophysics and Heat Transfer, 40(2), 465-477. https://doi.org/10.2514/1.t7298

Vancouver

Koca F, Bekki A, Özcan R. Enhancing Thermal Performance of Pin-Fin Heat Sinks Through Slot Orientation Modifications. Journal of Thermophysics and Heat Transfer. 2026;40(2):465-477. doi:10.2514/1.t7298

BibTeX
@article{Koca2026,
  author = {Koca, Ferhat and Bekki, Ayhan and Özcan, Recai},
  title = {Enhancing Thermal Performance of Pin-Fin Heat Sinks Through Slot Orientation Modifications},
  journal = {Journal of Thermophysics and Heat Transfer},
  year = {2026},
  volume = {40},
  number = {2},
  pages = {465--477},
  doi = {10.2514/1.t7298}
}
Kostenlos starten →