Assessment of Reynolds-Averaged Navier–Stokes/Blade Element Theory Body Force Method for Propeller Modeling
AIAA Journal · 2024-02 · 62 (2) · 758-775
DOI: 10.2514/1.j063302 ↗Kurz gefasst
Fachartikel in der Zeitschrift AIAA Journal, 2024-02. Verfasst von Hugues Pantel und 2 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: Clean Sky 2 Joint Undertaking, Horizon 2020 Framework Programme.
Abstract (Originalsprache)
This work presents an actuator disk-like body force method designed for propeller modeling, which is based on a full coupling between computational fluid dynamics (CFD) and blade element theory (BET). An analysis is conducted on the model to identify best practices for source term distribution. It is found that the source term volume shape has no impact on propeller loads and flowfield and that the velocities used for the BET analysis at each radial section should be evaluated exactly where half the source terms have been distributed in the CFD domain. Four tip-loss corrections, including two from literature, are also analyzed and compared to lifting-line and Reynolds-averaged Navier–Stokes (RANS) blade-resolved computations. The best practices and the most effective tip-loss correction lead to a final model that is compared to lifting-line, RANS, and unsteady RANS computations for different pitch angles and incidence angles, on the ONERA HAD-1 three-bladed light propeller. The RANS/BET body force model predicts thrust within 3% for axial flow and 8% for cases with incidence. The same accuracy is obtained for wake prediction.
Förderung
- Clean Sky 2 Joint Undertaking
- Horizon 2020 Framework Programme
Zitieren
APA
Pantel, H., Falissard, F., & Dufour, G. (2024). Assessment of Reynolds-Averaged Navier–Stokes/Blade Element Theory Body Force Method for Propeller Modeling. AIAA Journal, 62(2), 758-775. https://doi.org/10.2514/1.j063302
Vancouver
Pantel H, Falissard F, Dufour G. Assessment of Reynolds-Averaged Navier–Stokes/Blade Element Theory Body Force Method for Propeller Modeling. AIAA Journal. 2024;62(2):758-775. doi:10.2514/1.j063302
BibTeX
@article{Pantel2024,
author = {Pantel, Hugues and Falissard, Fabrice and Dufour, Guillaume},
title = {Assessment of Reynolds-Averaged Navier–Stokes/Blade Element Theory Body Force Method for Propeller Modeling},
journal = {AIAA Journal},
year = {2024},
volume = {62},
number = {2},
pages = {758--775},
doi = {10.2514/1.j063302}
}
EUVIMED