Flowfield of an S-Shaped Inlet with High Boundary-Layer Ingestion Fraction
Journal of Aircraft · 2024-05 · 61 (3) · 902-914
DOI: 10.2514/1.c037493 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Aircraft, 2024-05. Verfasst von Kun Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: National Science and Technology Major Project, Jiangsu provincial 333 high-level talent cultivation project, National Natural Science Foundation of China.
Abstract (Originalsprache)
The efficiency of boundary-layer ingestion (BLI) propulsion systems is closely related to the amount of ingested boundary layer. A high BLI fraction requires low propulsor flow power. In this paper, the internal flow characteristics and performance of an S-shaped inlet with a high BLI, up to 83.8% of the inlet capture height, are explored in detail under a freestream Mach number of 0.75. The results reveal that the middle and lower parts of the aerodynamic interface plane (AIP) section are packed with low-energy flows dominated by a pair of vortices, formed by the coalescence of side and separation vortices. At [Formula: see text], the side vortex, originating near the first inlet bend, is caused by a spanwise pressure gradient, while the side vortex is connected to the horseshoe vortex at the root of the inlet lip at [Formula: see text]. The vortex coalescence results in a sudden increase in the strength of the vortex core and a stepwise increase in circulation ([Formula: see text]). The flow vortex intensity in the inlet is divided into three stages from the distribution of [Formula: see text]. In addition, a reduction in [Formula: see text] increases the intensity of secondary flow along the section, particularly the intensity at the flow separation zone. With increasing [Formula: see text], the swirl intensity decreases, whereas the total pressure distortion index DC60 rises, reaching 0.54, which is beyond the requirement of turbomachinery component flow uniformity.
Förderung
- National Science and Technology Major Project
- Jiangsu provincial 333 high-level talent cultivation project
- National Natural Science Foundation of China
- Defense Industrial Technology Development Program
- Natural Science Foundation of Jiangsu Province
Zitieren
APA
Wang, K., Huang, H., Liu, L., Tan, H., Zheng, G., & Tang, X. (2024). Flowfield of an S-Shaped Inlet with High Boundary-Layer Ingestion Fraction. Journal of Aircraft, 61(3), 902-914. https://doi.org/10.2514/1.c037493
Vancouver
Wang K, Huang H, Liu L, Tan H, Zheng G, Tang X. Flowfield of an S-Shaped Inlet with High Boundary-Layer Ingestion Fraction. Journal of Aircraft. 2024;61(3):902-914. doi:10.2514/1.c037493
BibTeX
@article{Wang2024,
author = {Wang, Kun and Huang, He-xia and Liu, Lei and Tan, Hui-jun and Zheng, Gao-jie and Tang, Xue-bin},
title = {Flowfield of an S-Shaped Inlet with High Boundary-Layer Ingestion Fraction},
journal = {Journal of Aircraft},
year = {2024},
volume = {61},
number = {3},
pages = {902--914},
doi = {10.2514/1.c037493}
}
EUVIMED