EUVIMEDEUVIMED entdecken
Crossref

Secondary Loss Reduction via Integrated Endwall and Blade Profiling in Turbine Stage

Zhengshuai Du, Xinglong Fang, Le Cai, Wenyuan Zhao, Shouzuo Li, Songtao Wang

Journal of Propulsion and Power · 2026-11 · 42 (6) · 825-841

DOI: 10.2514/1.b40271 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Propulsion and Power, 2026-11. Verfasst von Zhengshuai Du und 5 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: Aero Engine and Gas Turbine Basic Research Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improving turbine performance requires both the mitigation of secondary flows and effective blade row matching. In this study, integrated endwall contouring and blade shaping were applied to a 1.5-stage axial turbine to suppress secondary flow development while maintaining favorable stator/rotor matching. The stator endwall contouring, developed using a B-spline surface parameterization based on a validated aft-loaded cascade, reduced endwall losses but induced stator/rotor mismatch in the lower passage. Positive bowing was therefore introduced to enhance upper passage flow control in synergy with the endwall contouring while independently regulating the lower passage flow. These modifications altered the stator exit flow angle, increasing mass flow and impacting blade loading; section profiling was applied to readjust the exit angle and maintain the operating point within an acceptable range. The rotor endwall contouring was designed using the same parameterization method. The final integrated profiling configuration achieved a 0.62% efficiency improvement at the design point and demonstrated robust performance over a wide operating range, as confirmed by steady simulations. Subsequent unsteady simulations further revealed its effectiveness in mitigating flowfield oscillations. This work provides practical design insights into the coupling effects of endwall and blade flow-control strategies at the stage level and their implications for stator/rotor matching.

Förderung

  • Aero Engine and Gas Turbine Basic Research Project

Zitieren

APA

Du, Z., Fang, X., Cai, L., Zhao, W., Li, S., & Wang, S. (2026). Secondary Loss Reduction via Integrated Endwall and Blade Profiling in Turbine Stage. Journal of Propulsion and Power, 42(6), 825-841. https://doi.org/10.2514/1.b40271

Vancouver

Du Z, Fang X, Cai L, Zhao W, Li S, Wang S. Secondary Loss Reduction via Integrated Endwall and Blade Profiling in Turbine Stage. Journal of Propulsion and Power. 2026;42(6):825-841. doi:10.2514/1.b40271

BibTeX
@article{Du2026,
  author = {Du, Zhengshuai and Fang, Xinglong and Cai, Le and Zhao, Wenyuan and Li, Shouzuo and Wang, Songtao},
  title = {Secondary Loss Reduction via Integrated Endwall and Blade Profiling in Turbine Stage},
  journal = {Journal of Propulsion and Power},
  year = {2026},
  volume = {42},
  number = {6},
  pages = {825--841},
  doi = {10.2514/1.b40271}
}
Kostenlos starten →