Distributed-Tube-Injector-Configured Hybrid Rocket Motor with High Thrust Density
Journal of Propulsion and Power · 2026-07 · 42 (4) · 615-626
DOI: 10.2514/1.b39672 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Propulsion and Power, 2026-07. Verfasst von Mehmet Kahraman und 1 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Gefördert von: DeltaV Space Technologies Co..
Abstract (Originalsprache)
The instability of combustion and low rate of fuel regression of the traditional hybrid rocket motor limit its applications. The distributed tube injector (DTI) presents a promising solution by significantly enhancing average fuel regression rates up to [Formula: see text], while maintaining stable combustion, particularly at the laboratory scale. In this study, we investigate the DTI at high fluxes to determine the characteristics of stability of combustion in hybrid rockets. We conducted tests by using motors with paraffin-based fuel and nitrous oxide in the blowdown mode. They were configured to run at fluxes of around [Formula: see text]. Data from 13 hot-fire tests showed that pressure oscillations in the chamber did not exceed 0.5 bar, thus demonstrating that the DTI-configured hybrid motor could operate smoothly even at motor fluxes that were nearly four times higher than those of traditional hybrid motors. We also verified the capability of the DTI to improve the regression rate. The average regression rate of DTI-configured motors exceeded [Formula: see text], while classically configured hybrid motors achieved a rate of only about [Formula: see text] at similar fluxes. The insights obtained from the tests can inform the design of hybrid motors that require a high thrust density.
Förderung
- DeltaV Space Technologies Co.
Zitieren
APA
Kahraman, M., & Karabeyoglu, A. M. (2026). Distributed-Tube-Injector-Configured Hybrid Rocket Motor with High Thrust Density. Journal of Propulsion and Power, 42(4), 615-626. https://doi.org/10.2514/1.b39672
Vancouver
Kahraman M, Karabeyoglu AM. Distributed-Tube-Injector-Configured Hybrid Rocket Motor with High Thrust Density. Journal of Propulsion and Power. 2026;42(4):615-626. doi:10.2514/1.b39672
BibTeX
@article{Kahraman2026,
author = {Kahraman, Mehmet and Karabeyoglu, Arif M.},
title = {Distributed-Tube-Injector-Configured Hybrid Rocket Motor with High Thrust Density},
journal = {Journal of Propulsion and Power},
year = {2026},
volume = {42},
number = {4},
pages = {615--626},
doi = {10.2514/1.b39672}
}
EUVIMED