Thermal and Resonance Characteristics of Tapered Cavities of Various Lengths
Journal of Propulsion and Power · 2026-01 · 42 (1) · 43-52
DOI: 10.2514/1.b39639 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Propulsion and Power, 2026-01. Verfasst von Shashi Bhushan Verma und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Alexander von Humboldt-Stiftung.
Abstract (Originalsprache)
An experimental investigation was conducted to study the thermal and resonance characteristics of tapered cavities with length-to-diameter ratios ([Formula: see text]) of 3, 6, and 11. For comparison, a cylindrical cavity with [Formula: see text] of 3 was also tested. The primary objective was to investigate the effect of variation in [Formula: see text], nozzle–resonator spacing ([Formula: see text]), and nozzle pressure ratio (NPR) i) in achieving maximum cavity end wall temperatures [Formula: see text] in minimum possible time and ii) on the associated resonance frequencies. A [Formula: see text] value of 124 is achieved over a broad range of NPR with the shortest tapered cavity operating in jet screech mode, which is nearly double that for a cylindrical cavity of similar [Formula: see text]. Increasing the cavity length, however, decreases this value significantly in this mode. On the other hand, the highest end wall temperatures are attained with longer cavities operating in jet regurgitant mode, but their response time is very large. Comparative thermal performances of cylindrical and tapered cavities of similar [Formula: see text] ratios show that the tapered cavity is far superior in operation. Tapering of cavity walls, therefore, enhances the thermal performance by progressive strengthening and focusing of the internal shock as it travels toward the cavity end relative to that in a cylindrical cavity.
Förderung
- Alexander von Humboldt-Stiftung
Zitieren
APA
Verma, S. B., & Bauer, C. (2026). Thermal and Resonance Characteristics of Tapered Cavities of Various Lengths. Journal of Propulsion and Power, 42(1), 43-52. https://doi.org/10.2514/1.b39639
Vancouver
Verma SB, Bauer C. Thermal and Resonance Characteristics of Tapered Cavities of Various Lengths. Journal of Propulsion and Power. 2026;42(1):43-52. doi:10.2514/1.b39639
BibTeX
@article{Verma2026,
author = {Verma, Shashi Bhushan and Bauer, Christian},
title = {Thermal and Resonance Characteristics of Tapered Cavities of Various Lengths},
journal = {Journal of Propulsion and Power},
year = {2026},
volume = {42},
number = {1},
pages = {43--52},
doi = {10.2514/1.b39639}
}
EUVIMED