Wear characteristics of PLA-Cu composites manufactured by fused deposition modelling under different temperature conditions
Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi · 29.01.2021 · 23 (1) · 358-365
DOI: 10.25092/baunfbed.854829 ↗Kurz gefasst
Fachartikel in der Zeitschrift Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, online erschienen am 29.01.2021. Verfasst von Sencer Süreyya KARABEYOĞLU und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 23 Literaturangaben.
Abstract (Originalsprache)
Copper shows promising characteristics for applications in electrical sliding contacts. In this study, copper reinforced polylactic acid (PLA-copper) composites manufactured by fused deposition modeling (FDM). Wear behaviour of PLA-copper composites under dry sliding conditions at three different temperature conditions (20oC, 50oC, 70oC) was evaluated by using pin-on-disc wear test equipment with attached heating module with 5N load applied at a sliding velocity of 104.7 mm/s. Tests have presented for 1040 steel bead interacting with polymer composite. Specific wear rates and coefficient of frictions of PLA-Cu polymer composites were evaluated. EDX analysis were conducted to examine the microstructure and scanning electron microscopy is used for the characterization of the worn surfaces.
Zitieren
APA
KARABEYOĞLU, S. S., EKŞİ, O., & FERATOĞLU, K. (2021). Wear characteristics of PLA-Cu composites manufactured by fused deposition modelling under different temperature conditions. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 23(1), 358-365. https://doi.org/10.25092/baunfbed.854829
Vancouver
KARABEYOĞLU SS, EKŞİ O, FERATOĞLU K. Wear characteristics of PLA-Cu composites manufactured by fused deposition modelling under different temperature conditions. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2021;23(1):358-365. doi:10.25092/baunfbed.854829
BibTeX
@article{KARABEYOLU2021,
author = {KARABEYOĞLU, Sencer Süreyya and EKŞİ, Olcay and FERATOĞLU, Kamil},
title = {Wear characteristics of PLA-Cu composites manufactured by fused deposition modelling under different temperature conditions},
journal = {Balıkesir Üniversitesi Fen Bilimleri Enstitüsü Dergisi},
year = {2021},
volume = {23},
number = {1},
pages = {358--365},
doi = {10.25092/baunfbed.854829}
}
EUVIMED