EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Modeling & optimization of Ti6Al4V turning for sustainable shearing considering rake angle

Amit Patil, Sushil Ingle

Research on Intelligent Manufacturing and Assembly · 2024

DOI: 10.25082/rima.2024.01.004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Research on Intelligent Manufacturing and Assembly, 2024. Verfasst von Amit Patil und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium alloys, such as Ti6Al4V, have become increasingly prevalent in aerospace and biomedical industries owing to their exceptional mechanical properties and corrosion resistance. However, the machining of these alloys presents significant challenges including high tool wear, poor surface finish, and low productivity. This study focused on enhancing the machinability of Ti6Al4V during CNC turning using the Taguchi optimization method. This approach aims to identify the optimal cutting parameters that minimize the surface roughness, flank wear, and crater wear, thereby improving the overall machining performance. This study systematically investigated the influence of various cutting parameters on machining outcomes. The experimental results demonstrate that the Taguchi method effectively determines the optimal process parameters, leading to a significant reduction in surface roughness and tool wear. These findings highlight the potential of the Taguchi optimization technique for achieving improved machinability and sustainability in the machining of Ti6Al4V.

Zitieren

APA

Patil, A., & Ingle, S. (2024). Modeling & optimization of Ti6Al4V turning for sustainable shearing considering rake angle. Research on Intelligent Manufacturing and Assembly. https://doi.org/10.25082/rima.2024.01.004

Vancouver

Patil A, Ingle S. Modeling & optimization of Ti6Al4V turning for sustainable shearing considering rake angle. Research on Intelligent Manufacturing and Assembly. 2024. doi:10.25082/rima.2024.01.004

BibTeX
@article{Patil2024,
  author = {Patil, Amit and Ingle, Sushil},
  title = {Modeling & optimization of Ti6Al4V turning for sustainable shearing considering rake angle},
  journal = {Research on Intelligent Manufacturing and Assembly},
  year = {2024},
  doi = {10.25082/rima.2024.01.004}
}
Kostenlos starten →