EUVIMEDEUVIMED entdecken
Crossref

Control of Pipe Cutting Robot: A More Effective Method

Quoc Bao Diep

Journal of Advanced Engineering and Computation · 2017

DOI: 10.25073/jaec.201712.82 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Advanced Engineering and Computation, 2017. Verfasst von Quoc Bao Diep. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a pipe cutting Robot system with two different cutting methods: the method with the end-effector moves on cutting path and direction while the stationary pipe and the method with the end-effector moves on a straight line while the rotating pipe to create the desired cutting path and direction. The cutting trajectory is described, the Robot model is constructed, solving the inverse kinematics, planning the trajectory of motion, simulating and controlling Robot in Matlab, and designing the experimental Robot to verify. The results of the two methods are compared to point out a better one. This research builds up an important foundation for choosing an effective method for pipe cutting Robot in industry. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Zitieren

APA

Diep, Q. B. (2017). Control of Pipe Cutting Robot: A More Effective Method. Journal of Advanced Engineering and Computation. https://doi.org/10.25073/jaec.201712.82

Vancouver

Diep QB. Control of Pipe Cutting Robot: A More Effective Method. Journal of Advanced Engineering and Computation. 2017. doi:10.25073/jaec.201712.82

BibTeX
@article{Diep2017,
  author = {Diep, Quoc Bao},
  title = {Control of Pipe Cutting Robot: A More Effective Method},
  journal = {Journal of Advanced Engineering and Computation},
  year = {2017},
  doi = {10.25073/jaec.201712.82}
}
Kostenlos starten →