Variation in Mechanical Properties of SAE 1006 Interstitial Free (IF) Steel Sheets During Cold Rolling
NUST Journal of Engineering Sciences · 2020
DOI: 10.24949/njes.v13i2.623 ↗Kurz gefasst
Fachartikel in der Zeitschrift NUST Journal of Engineering Sciences, 2020. Verfasst von Ali Dad Chandio und 9 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This research aims to study the variation in properties of hot-rolled SAE 1006 IF steel sheets during cold rolling to reveal the factors causing the decrease in formability of SPCG steel sheets during deep drawing. Results have shown that pickling does not affect the mechanical properties; however, cold rolling results in an increase in hardness, tensile strength and yield strength. Stress relieve annealing results in coarsening and homogenizing of grains which reduces brittleness and impart ductility. Temper rolling causes an increment in mechanical parameters again, improve surface hardness and flatness. By analyzing the microstructure and comparing it with the HESCO sample, it is revealed that there are still some elongated grains found along with coarse grains after annealing. Soaking time is not sufficient for the growth of homogenized structure, resulting in decreased ductility and formability during deep drawing.
Zitieren
APA
Chandio, A. D., Shah, A. A., Channa, I. A., Abro, S. H., Raza, Y., Rizwan, M., Ali, M., Iqbal, K., Ansari, M. B., & Salman, W. (2020). Variation in Mechanical Properties of SAE 1006 Interstitial Free (IF) Steel Sheets During Cold Rolling. NUST Journal of Engineering Sciences. https://doi.org/10.24949/njes.v13i2.623
Vancouver
Chandio AD, Shah AA, Channa IA, Abro SH, Raza Y, Rizwan M, et al. Variation in Mechanical Properties of SAE 1006 Interstitial Free (IF) Steel Sheets During Cold Rolling. NUST Journal of Engineering Sciences. 2020. doi:10.24949/njes.v13i2.623
BibTeX
@article{Chandio2020,
author = {Chandio, Ali Dad and Shah, Aqeel Ahmed and Channa, Iftikhar Ahmed and Abro, Shahid Hussain and Raza, Y. and Rizwan, Muhammad and Ali, Muhammad and Iqbal, K. and Ansari, Muhammad Basit and Salman, Waqas},
title = {Variation in Mechanical Properties of SAE 1006 Interstitial Free (IF) Steel Sheets During Cold Rolling},
journal = {NUST Journal of Engineering Sciences},
year = {2020},
doi = {10.24949/njes.v13i2.623}
}
EUVIMED