EUVIMEDEUVIMED entdecken
Crossref

Two-parameter mechanistic model for the fatigue crack growth of metals

Tawqeer Zada

NUST Journal of Engineering Sciences · 2019

DOI: 10.24949/njes.v12i2.425 ↗

Kurz gefasst

Fachartikel in der Zeitschrift NUST Journal of Engineering Sciences, 2019. Verfasst von Tawqeer Zada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a two-parameter mechanistic model for the fatigue crack growth has been developed. Fatigue failure is the major causes of mechanical structural failure. The fatigue failure progress in three stages crack initiation, crack growth and final failure. The fatigue crack growth has been modelled by different approaches, however these approaches are generally empirical. In this paper, a mechanistic fatigue crack growth model is proposed. The striation and its relation to the cyclic load is used for the model development. Scanning electronic microscope results are used to establish relation between striation and crack growth. The developed model is two-parameters. The model has been implemented and validated using experimental data from the literature. The model prediction is satisfactory in region II of the crack growth curve. However, in region I and region III the model deviates from experimental data. It is suggested to incorporate interaction of monotonic and cyclic loading in the mechanistic modelling for the fatigue growth.

Zitieren

APA

Zada, T. (2019). Two-parameter mechanistic model for the fatigue crack growth of metals. NUST Journal of Engineering Sciences. https://doi.org/10.24949/njes.v12i2.425

Vancouver

Zada T. Two-parameter mechanistic model for the fatigue crack growth of metals. NUST Journal of Engineering Sciences. 2019. doi:10.24949/njes.v12i2.425

BibTeX
@article{Zada2019,
  author = {Zada, Tawqeer},
  title = {Two-parameter mechanistic model for the fatigue crack growth of metals},
  journal = {NUST Journal of Engineering Sciences},
  year = {2019},
  doi = {10.24949/njes.v12i2.425}
}
Kostenlos starten →