EUVIMEDEUVIMED entdecken
Crossref

LIFE CYCLE COST AND UTILIZATION-BASED BREAK-EVEN ANALYSIS IN LEASE–PURCHASE DECISION OF MODULAR FORMWORK: A BUILDING PROJECT CASE STUDY

Mardiaman ST.MT, Ferwin Saragih

Jurnal Arsip Rekayasa Sipil dan Perencanaan · 22.10.2026 · 9 (3) · 148-158

DOI: 10.24815/jarsp.v9i3.732 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Arsip Rekayasa Sipil dan Perencanaan, online erschienen am 22.10.2026. Verfasst von Mardiaman ST.MT und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Formwork selection significantly influences the cost structure and long-term financial performance of reinforced concrete building projects. In Indonesia, conventional timber formwork remains dominant due to its low initial cost; however, repeated rental or replacement expenses may generate higher cumulative expenditures over time. This study evaluates the investment feasibility of modular formwork systems through an integration of Life Cycle Cost (LCC) analysis and lease–purchase decision modelling based on utilization-driven break-even thresholds. A quantitative case study was conducted on the UPPPD Kembangan Building Project in West Jakarta using actual market data on purchase prices, rental rates, and project duration. The results establish explicit utilization-based break-even points for key components. Hollow 50x50 and Jack Base reach financial parity at approximately 8 months of cumulative usage, while Scaffolding 170 cm requires approximately 11–12 months to achieve break-even. Components with high rental-to-purchase ratios demonstrate rapid payback within a single project cycle, whereas higher-value components become economically advantageous under multi-project utilization scenarios. Sensitivity analysis confirms that investment feasibility is predominantly determined by annual utilization intensity rather than initial capital magnitude. The findings reposition modular formwork from a temporary operational expense toward a productive capital asset within construction asset management strategy. Theoretically, this study contributes by integrating LCC principles with lease–purchase modelling and by formulating quantitative utilization thresholds based on real project data in the Indonesian construction context. Practically, the proposed framework supports contractors in making data-driven investment decisions that enhance long-term cost efficiency and financial sustainability.

Zitieren

APA

ST.MT, M., & Saragih, F. (2026). LIFE CYCLE COST AND UTILIZATION-BASED BREAK-EVEN ANALYSIS IN LEASE–PURCHASE DECISION OF MODULAR FORMWORK: A BUILDING PROJECT CASE STUDY. Jurnal Arsip Rekayasa Sipil dan Perencanaan, 9(3), 148-158. https://doi.org/10.24815/jarsp.v9i3.732

Vancouver

ST.MT M, Saragih F. LIFE CYCLE COST AND UTILIZATION-BASED BREAK-EVEN ANALYSIS IN LEASE–PURCHASE DECISION OF MODULAR FORMWORK: A BUILDING PROJECT CASE STUDY. Jurnal Arsip Rekayasa Sipil dan Perencanaan. 2026;9(3):148-158. doi:10.24815/jarsp.v9i3.732

BibTeX
@article{STMT2026,
  author = {ST.MT, Mardiaman and Saragih, Ferwin},
  title = {LIFE CYCLE COST AND UTILIZATION-BASED BREAK-EVEN ANALYSIS IN LEASE–PURCHASE DECISION OF MODULAR FORMWORK: A BUILDING PROJECT CASE STUDY},
  journal = {Jurnal Arsip Rekayasa Sipil dan Perencanaan},
  year = {2026},
  volume = {9},
  number = {3},
  pages = {148--158},
  doi = {10.24815/jarsp.v9i3.732}
}
Kostenlos starten →