EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Design and Performance Analysis of a Propeller for a Hybrid Turbo-Electric Propulsion System of a Regional Aircraft

Anton Koshel, Oleksandr Yelans`ky, Vasyl Loginov

Transactions on Aerospace Research · 01.06.2026 · 2026 (2) · 38-52

DOI: 10.2478/tar-2026-0008 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Transactions on Aerospace Research, online erschienen am 17.06.2026. Verfasst von Anton Koshel und 2 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Meeting the ACARE environmental goals is a central driver of current EU aerospace research, and hybrid turbo-electric propulsion systems (HTEPS) are emerging as a promising route to reducing the environmental impact of regional aviation. This paper reports the design and performance analysis of a propeller for the HTEPS of an advanced regional aircraft. Twenty propeller variants were generated using Zhukovsky’s vortex theory and the Adkins–Liebeck BEMT algorithm, with a NASA GA(W) aerofoil section, and were evaluated at Max Cruise ( H = 6000 m, M = 0.45) and Take-off ( H = 0, M = 0) by CFD analysis in ANSYS CFX using the SST turbulence model with Gamma–Theta transition. The effects of blade number and maximum diameter on Cruise efficiency and Take-off thrust were studied, leading to the selection of a seven-bladed propeller with a maximum diameter of 4.15 m. The performance of the selected propeller was then calculated over a wide range of flight Mach numbers. The final variant exhibits a maximum efficiency above 0.86, which remains almost constant over the range M = 0.35 to M = 0.65. Joint operation of the propeller and the HTEPS was simulated under three engine control laws (Power = const, T 41 = const, PR tot = const). The PR tot = const law is shown to offer the highest propeller efficiency at elevated flight speeds, together with benefits for gas-turbine efficiency and for fuel-cell performance through the supply of higher-pressure bleed air. The 3D geometry of the propeller’s aerodynamic surfaces has been generated and is intended for use in subsequent aeroacoustic CFD analysis.

Zitieren

APA

Koshel, A., Yelans`ky, O., & Loginov, V. (2026). Design and Performance Analysis of a Propeller for a Hybrid Turbo-Electric Propulsion System of a Regional Aircraft. Transactions on Aerospace Research, 2026(2), 38-52. https://doi.org/10.2478/tar-2026-0008

Vancouver

Koshel A, Yelans`ky O, Loginov V. Design and Performance Analysis of a Propeller for a Hybrid Turbo-Electric Propulsion System of a Regional Aircraft. Transactions on Aerospace Research. 2026;2026(2):38-52. doi:10.2478/tar-2026-0008

BibTeX
@article{Koshel2026,
  author = {Koshel, Anton and Yelans`ky, Oleksandr and Loginov, Vasyl},
  title = {Design and Performance Analysis of a Propeller for a Hybrid Turbo-Electric Propulsion System of a Regional Aircraft},
  journal = {Transactions on Aerospace Research},
  year = {2026},
  volume = {2026},
  number = {2},
  pages = {38--52},
  doi = {10.2478/tar-2026-0008}
}
Kostenlos starten →