Investigation of Intensive Wear Zones of an Oil Press Screw During Oilseed Processing
Management Systems in Production Engineering · 01.12.2026 · 34 (4) · 614-630
DOI: 10.2478/mspe-2026-0052 ↗Kurz gefasst
Fachartikel in der Zeitschrift Management Systems in Production Engineering, online erschienen am 17.11.2026. Verfasst von Gulnara Kokayeva und 5 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The article presents a computational and experimental study of the wear of an oil press screw during the processing of oilseed raw materials. The study aimed to determine the most heavily loaded zones of the screw by comparing an engineering calculation model with experimental data. The calculation model included a linear pressure distribution along the screw, Coulomb’s law to estimate friction, and Archard’s equation to predict linear wear. Experimental verification was conducted by measuring changes in the geometric parameters of the screw flights across three screw zones after operation. The calculated annual wear in zones I, II, and III was 0.166, 0.243, and 0.318 mm/year, respectively, while the experimental values were 0.178, 0.260, and 0.348 mm/year, respectively. The deviation between the calculated and experimental data was within 7.2-9.4%, which confirms the applicability of the proposed model for preliminary wear assessment. It was established that the maximum wear is localized in zone III, corresponding to the final compression and material discharge section. The obtained results justify the need for local strengthening or the application of a wear-resistant coating to the most heavily loaded screw sections. From a practical standpoint, the proposed approach can be used in the reliability management system of an oil press to plan periodic inspections, identify priority maintenance areas, and select economically justified zones for screw restoration or strengthening.
Zitieren
APA
Kokayeva, G., Kakimov, M., Ramazanova, Z., Mursalykova, M., Sarsenkyzy, A., & Bembenek, M. (2026). Investigation of Intensive Wear Zones of an Oil Press Screw During Oilseed Processing. Management Systems in Production Engineering, 34(4), 614-630. https://doi.org/10.2478/mspe-2026-0052
Vancouver
Kokayeva G, Kakimov M, Ramazanova Z, Mursalykova M, Sarsenkyzy A, Bembenek M. Investigation of Intensive Wear Zones of an Oil Press Screw During Oilseed Processing. Management Systems in Production Engineering. 2026;34(4):614-630. doi:10.2478/mspe-2026-0052
BibTeX
@article{Kokayeva2026,
author = {Kokayeva, Gulnara and Kakimov, Mukhtarbek and Ramazanova, Zhanat and Mursalykova, Maigul and Sarsenkyzy, Akerke and Bembenek, Michał},
title = {Investigation of Intensive Wear Zones of an Oil Press Screw During Oilseed Processing},
journal = {Management Systems in Production Engineering},
year = {2026},
volume = {34},
number = {4},
pages = {614--630},
doi = {10.2478/mspe-2026-0052}
}
EUVIMED