Band gap engineering in Cu 2 FeSnS 4 nanostructures via single (Ag) and co-substitution (Ag–Mn): Correlating structure, morphology, and optical properties
Materials Science-Poland · 01.03.2026 · 44 (1) · 180-190
DOI: 10.2478/msp-2026-0012 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science-Poland, online erschienen am 10.07.2026. Verfasst von Rawaa Majid Thamer und 1 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
In this study, a quaternary Cu 2 FeSnS 4 (CFTS) nano-compound was prepared and characterized using the solvothermal method, with partial substitution between copper and silver ions to form the Cu 1.8 Ag 0.2 FeSnS 4 compound, in addition to a partial co-substitution between iron and manganese ions to form the Cu 1.8 Ag 0.2 Fe 0.5 Mn 0.5 SnS 4 compound. The aim of the study is to compare single doping and co-doping and their effect on structural, optical, and morphological properties. The X-ray diffraction and Raman spectroscopy results showed that all the prepared compounds have a kesterite crystal structure with the absence of secondary phases, while maintaining the crystalline phase during the substitution process, accompanied by a slight change in the crystal lattice constants. Field emission scanning electron microscopy analysis revealed a clear evaluation in nanoparticle morphology with doping and co-doping. Brunauer–Emmett–Teller analysis indicated a decrease in surface area upon doping. It was also observed that there is a gradual decrease in the energy gap accompanied by strong absorption in the visible region when the doping and co-doping process is carried out. According to these results, the authors confirm that co-doping with silver and manganese is an effective strategy for controlling optoelectronic properties. It also has a clear impact on surface properties, which must be considered to balance maintaining an effective surface area with minimizing the energy gap. Therefore, these co-doped compounds are promising candidates for photocatalysis and thin-film solar cell applications.
Zitieren
APA
Thamer, R. M., & Hussein, H. M. (2026). Band gap engineering in Cu 2 FeSnS 4 nanostructures via single (Ag) and co-substitution (Ag–Mn): Correlating structure, morphology, and optical properties. Materials Science-Poland, 44(1), 180-190. https://doi.org/10.2478/msp-2026-0012
Vancouver
Thamer RM, Hussein HM. Band gap engineering in Cu 2 FeSnS 4 nanostructures via single (Ag) and co-substitution (Ag–Mn): Correlating structure, morphology, and optical properties. Materials Science-Poland. 2026;44(1):180-190. doi:10.2478/msp-2026-0012
BibTeX
@article{Thamer2026,
author = {Thamer, Rawaa Majid and Hussein, Hussein M.},
title = {Band gap engineering in Cu 2 FeSnS 4 nanostructures via single (Ag) and co-substitution (Ag–Mn): Correlating structure, morphology, and optical properties},
journal = {Materials Science-Poland},
year = {2026},
volume = {44},
number = {1},
pages = {180--190},
doi = {10.2478/msp-2026-0012}
}
EUVIMED