Development of building materials based on a high content of fly ash and polycondensation products from Chinese heat and power plants
Materials Science-Poland · 01.08.2022 · 40 (2) · 270-288
DOI: 10.2478/msp-2022-0025 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science-Poland, online erschienen am 24.11.2022. Verfasst von Andrii Bieliatynskyi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The addition of fly ash from thermal power plants (TPP) and chemical additives, such as polycondensation products of acetone and formaldehyde, is an effective and economical method for increasing the strength and durability of building materials, in particular concrete. Fly ash added to the concrete and mortars at 10%–15% does not reduce their technical properties, while polycondensation products of acetone and formaldehyde plasticize and accelerate the hardening process of concrete. The study aims to substantiate the possibility of obtaining concrete on dense aggregates with a high content of fly ash through the use of polycondensation products of acetone and formaldehyde as additives, which are highly soluble in water and polyfunctional. The strength indicators were determined using standard methods. The study has shown quantitative changes in the properties of the fly ash-concrete mixture, improvement of its physical and technical characteristics, and durability of the fly ash concrete with the addition of polycondensation products of acetone and formaldehyde. In the present study, the authors determine the effect of fly ash addition on the properties of a concrete mixture, as well as the maximum possible content of fly ash that can be added to concrete to maximize certain properties required of the mixture; additionally, the same action is conducted with the addition of polycondensation products of acetone and formaldehyde concomitant with the addition of fly ash.
Zitieren
APA
Bieliatynskyi, A., Yang, S., Pershakov, V., Shao, M., & Ta, M. (2022). Development of building materials based on a high content of fly ash and polycondensation products from Chinese heat and power plants. Materials Science-Poland, 40(2), 270-288. https://doi.org/10.2478/msp-2022-0025
Vancouver
Bieliatynskyi A, Yang S, Pershakov V, Shao M, Ta M. Development of building materials based on a high content of fly ash and polycondensation products from Chinese heat and power plants. Materials Science-Poland. 2022;40(2):270-288. doi:10.2478/msp-2022-0025
BibTeX
@article{Bieliatynskyi2022,
author = {Bieliatynskyi, Andrii and Yang, Shilin and Pershakov, Valerii and Shao, Meiyu and Ta, Mingyang},
title = {Development of building materials based on a high content of fly ash and polycondensation products from Chinese heat and power plants},
journal = {Materials Science-Poland},
year = {2022},
volume = {40},
number = {2},
pages = {270--288},
doi = {10.2478/msp-2022-0025}
}
EUVIMED